623681
35
Zoom out
Zoom in
Previous page
1/57
Next page
68
69
8.5 Using the brakes
WARNING Danger from falls and accidents
If you operate the brakes too firmly this can lock the wheels and cause the bike to skid or roll over.
Frequent and lengthy braking causes the brake system to become very hot, which can lead to undesirable
deterioration of the braking effect (fading).
Familiarise yourself with the use of the brakes. Begin by riding slowly and operating the brake lever gently.
You should perform these braking exercises on level surfaces without any road traffic.
Brake in a controlled manner and press both brake levers at the same time.
The brakes of your bike are very powerful. If you pull the brake lever too strongly, it is possible that the
wheels will lock.
A blocking front wheel can cause a roll-over.
A blocking rear wheel can make it impossible to control your bike.
Disc brakes only reach their full breaking capacity after a “running in” phase.
Please ride very defensively for as long as your braking system has not been run in.
Run your disc brake in. The rule of thumb is: perform approximately 30 braking operations from a moder-
ate speed (approx. 25 km/h) until you come to a standstill. As soon as the braking effect no longer increases
with the same braking force, the running in procedure is completed.
Avoid long downhill riding for as long as your braking system has not been run in.
Frequent and lengthy braking - especially in the case of lengthy downhill rides and/or heavy loading - cau-
ses the brake system to become very hot.
Considerable increases in heat may lead to deterioration of the braking effect. This causes the braking
distance to become longer.
Take breaks and allow your brakes to cool down as soon as you identify the first signs of deterioration of the
braking effect (fading).
Do not touch hot rims or brake discs (danger of burns!). Allow your brake system to cool down for at least
10 minutes. See Section 10 Riding the bike.
Allow your brake system to cool down in the air only. Never cool the brake system by pouring water, etc.
over it (risk of permanent damage to materials!).
Do not continue riding until you are sure that your brake system has regained its braking effect.
NOTE:
Please also comply with the above points on running in disc brakes after the replacement of brake discs and/or
brake pads by your specialist dealer.
NOTE:
About 65% of the total braking power is provided by the front brake.
Maximum braking power is reached by simultaneously pressing both levers.
1. Pull the lever towards the handlebar to actuate the brake.
8.6 Operating the clamping systems for wheels and the saddle post
WARNING Danger from falls and accidents
WARNING Danger from falls and accidents. If the wheels and saddle post are not correctly mounted, these
parts can become loose and as a result lead to dangerous riding situations, falls and accidents.
Comply with the following description.
Practise the operation of the quick-release axle and/or thru axle several times and regularly.
The opening and closing of screw-nut clampings on wheels may only be performed by a specialist work-
shop.
If after installation you are not sure whether your front wheel and/or the saddle post have been cor-
rectly mounted, do not use your bike and consult your specialist bicycle dealer.
8.6.1 Opening and closing the quick-release axle on the wheel
1 Axle
2 Nut
3 Lever
4 Spring
8.6.1.1 Opening the quick-release axle
1. Press the lever away from the hub.
2. Turn the screw nut in an anti-clockwise direction until the wheel can be pulled out of the frame or front
forks without great effort.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ghost Bikes SL AMR X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ghost Bikes SL AMR X in the language / languages: English as an attachment in your email.

The manual is 9,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ghost Bikes SL AMR X

Ghost Bikes SL AMR X User Manual - German - 57 pages

Ghost Bikes SL AMR X User Manual - Dutch - 57 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info