623707
36
Zoom out
Zoom in
Previous page
1/57
Next page
70
71
NOTE:
Make sure that you do not lose the springs.
8.6.1.2 Closing the quick-release axle
1. If the quick-release axle has been completely removed from the hub, push it through the hub from the
left-hand side (as seen in the riding direction) with the spring attached.
2. Place the second spring and screw nut on to the quick-release axle.
3. Turn the nut in a clockwise direction on to the right-hand end of the quick-release axle, which is pro-
truding out of the hub.
4. Tilt the eccentrically pivoted lever so that it forms roughly the extension of the hub axle. Hold the lever
in this position.
5. Now turn the screw nut until the eccentrically pivoted lever when turned through 90° about its pivot can
only move against a resistance (it then forms more or less the straight extension of the hub axle).
6. Now press the lever by a further 90° up to its end position.
7. Testing the adjustment of the quick-release lever:
If the quick-release lever does not close tightly enough:
WARNING Danger from falls and accidents
If the lever cannot move in its final position (90° to the hub axle) because the pre-tension is too
great, it is possible that the lever will become loose of its own accord while you are riding the bike,
so that the front wheel also becomes loose. This can lead to dangerous riding situations, falls and
accidents.
Open the quick-release lever.
Tighten the nut slightly in a clockwise direction.
Close the quick-release lever.
If the quick-release lever closes too tightly:
WARNING Danger from falls and accidents
If the lever cannot move in its final position (90° to the hub axle) because the pre-tension is too
great, it is possible that the lever will become loose of its own accord while you are riding the bike,
so that the front wheel also becomes loose. This can lead to dangerous riding situations, falls and
accidents.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ghost Bikes POWERKID 20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ghost Bikes POWERKID 20 in the language / languages: English as an attachment in your email.

The manual is 9,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ghost Bikes POWERKID 20

Ghost Bikes POWERKID 20 User Manual - German - 57 pages

Ghost Bikes POWERKID 20 User Manual - Dutch - 57 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info