623700
39
Zoom out
Zoom in
Previous page
1/57
Next page
76
77
If the lever does not close tightly enough:
WARNING Danger from falls and accidents
If the lever is too loose when closed, the saddle post may suddenly slip down a long way while the bike is
being ridden. This can lead to dangerous riding situations, falls and accidents.
Open the lever.
Turn the knurled nut slightly in a clockwise direction (as seen from the left).
Close the lever again.
If the lever closes too tightly:
WARNING Danger from falls and accidents
If the lever cannot move in its final position (90° to the hub axle) because the pre-tension is too great (see
illustration), the lever may become loose while the bike is being ridden and the saddle post may suddenly
slip down a long way. This can lead to dangerous riding situations, falls and accidents.
Open the lever.
Turn the knurled nut back slightly in an anticlockwise direction (as seen from the left).
Close the quick-release lever again.
8.6.4 Screw-nut clamping on wheels
WARNING Danger from falls and accidents
Incorrect installation of the wheels using the quick-release hub axle can lead to dangerous riding situa-
tions, falls, accidents and material damage.
You should have wheels with a screw-nut clamping only opened and closed by a specialist workshop.
8.6.5 Opening and closing the screw-nut clamping on saddle posts
You need an Allen key and a torque spanner with a hexagonal socket of size 4 and 5 mm.
8.6.5.1 Opening the screw-nut clamping on the saddle post
1. Loosen the clamping bolt(s) by a few turns until the saddle post can be easily moved.
8.6.5.2 Closing the screw-nut clamping on the saddle post
NOTE:
Connect the saddle post clamping only if the saddle post is located in the saddle tube.
Closing without an inserted saddle post may cause irreparable damage to the frame.
1. Check the tightness of the clamp. The clamp must sit flush on the saddle tube.
2. Retighten the clamping bolt/s with the torque spanner. Prescribed tightening torque: 5-8 Nm for alu-
minium frames or 5-6 Nm for carbon frames
WARNING Risk of falls and accidents
If the tightening torque is too high, this may damage your saddle post. This may then break while
you are riding the bike and result in a serious accident.
It is essential to use a torque wrench when tightening the clamp bolt(s) and comply with the speci-
fied tightening torque.
For saddle post clamps with a knurled nut and quick-release lever you should ask your dealer to
show you how tight these may be tightened.
9. Loading the Bike
WARNING Danger from falls and accidents
Adding an extra load impairs the riding behaviour of your bike and the braking distance becomes longer.
And if you overload your bike, it is possible that parts of it might even break or fail. All of this can lead to
dangerous riding situations, falls and accidents.
You should load your bike in such a way that you always have enough room to move and can always oper-
ate your bike safely when it is loaded.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ghost Bikes NIVOLET TOUR DISC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ghost Bikes NIVOLET TOUR DISC in the language / languages: English as an attachment in your email.

The manual is 9,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ghost Bikes NIVOLET TOUR DISC

Ghost Bikes NIVOLET TOUR DISC User Manual - German - 57 pages

Ghost Bikes NIVOLET TOUR DISC User Manual - Dutch - 57 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info