623700

Ghost Bikes NIVOLET TOUR DISC Manual

19
Zoom out
Zoom in
Previous page
1/57
Next page
36
37
4.6.2.2 Proper handling of carbon parts
1. Under no circumstances should you install clips, screw connections, clampings or other elements
which exert mechanical forces on the carbon tube. Excluded from this are the areas of components e.g.
handlebars and saddle posts which are explicitly designated as such. Nevertheless, it is important here
to comply exactly with the tightening torques!
2. Clamping to mounting stands or other forms of clamping:
• Never clamp your bike at a carbon tube or carbon saddle post in the jaws of an assembly stand.
• For clamping in an assembly stand you should temporarily use a saddle post with the same diameter.
For instructions on dismantling and installation please see section 13.2, Dismantling and installing sad-
dle post with saddle.
3. Take care when using shackle locks! Under certain circumstances these can damage your frame.
• Ensure when using shackle locks that these only touch the corresponding carbon tube and do not
exert any clamping force or weight.
4. Saddle clamping bracket / saddle post
• The prescribed tightening torque of the saddle clamping bracket bolt is 5 – 6 Nm.
• The saddle tube must not be reamed out or otherwise mechanically machined.
• Saddle post and saddle tube must not be greased. Use only the carbon assembly paste supplied with
the bike.
• Saddle posts may only be assembled in a carbon frame using the carbon assembly paste supplied.
• The saddle clamp must not be closed when the saddle post is removed, as otherwise irreparable
damage to the saddle tube may result.
• Take the saddle post out of the frame approximately every two months, clean it and apply new carbon
assembly paste. See section 13.2, Dismantling and installing saddle post with saddle.
5. Bottle holders:
• The thread sets are provided for the attachment of commercially available bottle holders. The maxi-
mum tightening torque of the screws for fastening the bottle holder to the frame is 4Nm.
6. Roller training:
• The use of roller trainers with rigid clamping is not permitted. The rigid clamping of the fork ends or
quick-release axle exerts loads that differ significantly from those occurring during the permitted use
for riding. This can result in damage to the bike frame.
• Use on a loose roller without rigid clamping of the frame is permitted.
7. Transport: See section 13, Transporting the Bike.
4.7 Tyres
GHOST bikes have different tyres as standard. The tyre brand, type, size and air pressure information can be
found printed on the tyre walls.
As far as the valve types are concerned, we mainly use inner tubes with Sclaverand valve (SV), which is col-
loquially known as the “French valve”. The models of the POWERKID range may include inner tubes with a
Sclaverand valve (SV) and an automatic valve (AV). For the version, please refer to the following illustration.
If replacement inner tubes are used, it must be ensured that only inner tubes are used which contain the
same valves as the original inner tube, as the diameter of the SV and AV valves differ from one another.
Automatic valve (AV) Dunlop valve (DV) Sclaverand valve (SV) (French)
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ghost Bikes NIVOLET TOUR DISC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ghost Bikes NIVOLET TOUR DISC in the language / languages: English as an attachment in your email.

The manual is 9,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ghost Bikes NIVOLET TOUR DISC

Ghost Bikes NIVOLET TOUR DISC User Manual - German - 57 pages

Ghost Bikes NIVOLET TOUR DISC User Manual - Dutch - 57 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info