623687
47
Zoom out
Zoom in
Previous page
1/57
Next page
92
93
13.1.5.5 Opening the rim brake of the racing bike
1. Rotate the lever upwards as far as it will go.
13.1.5.6 Closing the rim brake of the racing bike
1. Rotate the lever downwards as far as it will go.
13.2 Dismantling and installing saddle post with saddle
WARNING Danger from falls and accidents
An incorrectly mounted saddle post can suddenly slip down a long way or out of the saddle tube. This can
lead to dangerous riding situations, falls and accidents.
You should only carry out this work if you have the required tools and the necessary technical skills.
13.2.1 Dismantling the saddle post
1. Open the saddle post clamping according to sections 8.6.3.1, Opening the quick-release axle on the saddle
post clamping and 8.6.5.1, Opening the screw-nut clamping on the saddle post.
2. Pull the saddle post with saddle out of the saddle tube.
NOTE:
Do not operate the saddle post clamping when it has been dismantled. Otherwise, the frame may be damaged.
Depending on the frame and saddle post material, there is grease or carbon assembly paste on the saddle post,
which might soil your vehicle interior or other items. You can avoid contact with this by wrapping the saddle post in
a cloth or plastic bag, for example.
13.2.2 Installing the saddle post
1. Please refer to the table in section 4.6.1, Breakdown to find out what material your frame is made of.
2. If your saddle post and frame are made of aluminium, you should grease the insertion section of the
saddle post.
NOTE:
After removal, there is usually so much grease still present from the factory that it is not necessary to
grease it again.
3. If the saddle post and/or frame are made of carbon, coat the insertion section with the assembly paste
supplied for carbon parts.
NOTE:
After removal, there is usually so much assembly paste still present from the factory that it is not necessary
to coat it again.
Do not use grease under any circumstances!
4. Return the saddle and saddle post back to the desired position with the correct insertion depth: The
“STOP” or “MAX” marking must be located in the invisible section of the saddle tube.
5. Close the saddle post clamping according to section 8.6.3.2, Closing the quick-release axle on the saddle
post clamping and 8.6.5.2, Closing the screw-nut clamping on the saddle post.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ghost Bikes KATO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ghost Bikes KATO in the language / languages: English as an attachment in your email.

The manual is 9,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ghost Bikes KATO

Ghost Bikes KATO User Manual - German - 57 pages

Ghost Bikes KATO User Manual - Dutch - 57 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info