779133
184
Zoom out
Zoom in
Previous page
1/288
Next page
Cycle
Maintenance
160
14.15 Hub dynamo
xCheck the cable connections to the hub dynamo.
xClean the connectors if necessary.
xCheck whether the connectors are tight and look for corrosion.
xReconnect if necessary.
xIf the cable connections are damaged, have them replaced by your dealer.
14.16 Chain tension
This chapter applies to models with a coaster brake or hub shifting system.
1. Set the cycle on the kickstand.
2. Press the chain upwards or downwards
and check whether you can press it
through a distance of between 10 and
15 mm/0.4–0.6" (see “Illustr.: Chain
tension”).
xIf you can press the chain upwards or
downwards by less than 10 mm/0.4"
or more than 15 mm/0.6", or if the
chain is grinding against the all-round
chain guard, have the chain tension adjusted by your dealer.
14.16.1 Adjusting the chain tension with hub gears
1. Loosen the screw connection of the rear wheel with a suitable tool. If a coaster brake
is installed in the hub, the screw connection of the torque arm to the frame must also
be removed.
1. Tension the chain by pulling the rear wheel backwards evenly in the dropout. Make
sure that the rear wheel is aligned straight in the frame. The optimum chain tension
is achieved when you can push the chain up and down a minimum of 10 mm and a
maximum of 15 mm.
1. After adjusting the chain tension, retighten the screws on the rear wheel. If necessary,
remount the torque arm of the coaster brake on the frame.
If you do not have the necessary expertise and tools for installation, contact your dealer.
Illustr.: Chain tension (example)
10-15 mm/0.4-0.6"
184


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ghost Bikes 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ghost Bikes 2020 in the language / languages: English as an attachment in your email.

The manual is 28.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ghost Bikes 2020

Ghost Bikes 2020 User Manual - German - 287 pages

Ghost Bikes 2020 User Manual - Dutch - 286 pages

Ghost Bikes 2020 User Manual - French - 294 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info