Manual Ghibli WINNER 38E (page 57 of 184) (English, German, French, Italian, Portuguese, Spanish)

505275

Zoom out

Zoom in

1/184

Fig. 19

Fig. 20

EN-23

11.1.f - Replacing the squeegee rub

ber blades (Fig. 19)

When it becomes clear that drying the floor

is difficult or traces of water remain on the

floor, it is necessary to check the wear on the

squeegee rubber blades (1):

- Remove the squeegee unit (1) as indicat-

ed in the “Cleaning the squeegee” para-

graph.

- Loosen the finned nuts (2) and remove

the rubber blades (3).

N.B.:

When the rubber blades (3) are worn on one

side, on one occasion they may be turned

over.

- Replace or turn over the rubber blades

(3) without inverting them.

- Replace all the components in reverse

order.

N.B.:

It is possible to have two types of rubber

blade.

Para rubber blades for all types of floor and

polyurethane rubber blades for mechanical

workshop floors which are dirty with oil.

11.1.g - Squeegee incidence set up

(Fig. 20)

- Lower the squeegee using the specific

lever.

- Start the suction unit and advance for

some metres before stopping the suction

unit and the machine.

- Check the angle of incidence of the rub-

bers (1) on the floor.

Fig. A = too squatted

Fig. B = too high

Fig. C = correct position.

- Take off the squeegee from the machine

- To set up, loosen the screw (2) of the

wheel (3) and move the wheel vertically

in the slot; by lifting the wheel, the angle

of incidence increases, viceversa it de-

creases.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ghibli WINNER 38E in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 6,16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ghibli WINNER 38E Manual

Product: