Manual Ghibli T1 (page 14 of 36) (English, German, French, Italian, Portuguese, Spanish)

505269

Zoom out

Zoom in

1/36

ITEN

EN - 2

hered with (Legislative Decree No. 151 dated

25/7/05 - 2002/96/CE - 2003/108/CE)

Electrical equipment has a symbol

bearing a crossed out wheeled bin.

The symbol indicates that the appa-

ratus was introduced on the market

after 13 August 2005 and must be

disposed off separately.

Improper or illegal disposal of such equip-

ment or using it incorrectly, can be hazard-

ous to persons and the environment due to

the substances and materials contained.

Administrative and criminal penalties will be

imposed for non-compliance with standards

pertaining to the disposal of electrical waste.

REFERENCE

LEGISLATIONS

The apparatus has been designed in accord-

ance with the Machinery Directive in force

and with the standards set out in the EC Dec-

laration of Conformity supplied with the unit.

UNPACKING

After removing the package as indicated in

the instructions shown on the package itself,

check the integrity of the unit and all compo-

nents supplied.

If any evident damage is noticed, contact the

retailer or an authorised technical support

centre.

PREPARING THE

UNIT

Checking the lter systems

- Release the lever (1 Fig.1) and remove

the cover (2 Fig.2) together with the pa-

per bag (3 Fig.2).

- Removetheclothlter(4Fig.3)anden-

sure that the lter cartridge is mounted

insidetheunit(5Fig.4).

- Settheclothlterbackinplace(4Fig.3)

and remount the paper bag (3 Fig.5) on

the cover (2 Fig.5). Whilst keeping this

in place, put back the cover (2 Fig.6) by

hooking the slot (6 Fig.7) found on the

cover onto the metal strip (7 Fig.7) found

on the body of the unit.

- Block the cover in place by means of the

lever (1 Fig.1).

Assembling the pipes

- Insertthesleeve(8Fig.8)oftheexible

pipe supplied into the air suction hole (9

Fig.8).

- Hook the rigid extensions (11 Fig.9) to the

ergonomichandle (10Fig.9)of theex-

ible pipe.

- Hook the accessory required (suction in-

let, brush, crevice tool, etc.) to the rigid

extensions (11 Fig.9).

Positioning the power cable

- Form a ring with the power cable, hook it

onto the tooth (12 Fig.10) and place it as

shown in picture 10.

Positioning the unit onto your shoul-

ders

- Lift the unit and place it on your shoul-

ders.

- Usethebuckle(14Fig.11)to adjust the

shoulder straps (13 Fig.11).

- Use the buckle (16 Fig.11) to adjust the

belt (15 Fig.11).

NOTE:

Elastic straps (17 Fig.11) are found on the

belt (15 Fig.11) and these are used when

placing accessories such as the brush, the

crevice tool, etc.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ghibli T1 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ghibli T1 Manual

Product: