505278

Ghibli S1- 45M45 Manual

54
Zoom out
Zoom in
Previous page
1/224
Next page
EN
EN-14
6.1 CONTROL PANEL
(Fig. 9)
1) Suction unit activation switch
This switch can be enabled by turning
the key (2) to its “1” position.
With the switch in its “I” position, press
it down. The switch will light up and the
suction unit will activate.
2) Starter key
Turn the key to its “1” position to enable
the machine for function.
3a) Operating time indicator.
This indicator lights up while the key is
in its “1” position and indicates the ma-
chine’s working hours.
3b) Battery charge status indicator.
This indicator lights up while the key is in
its “1” position and indicates the battery
charge status.
- Maximum battery charge status is indi-
cated by the illumination of the green
led indicators or the illumination of the
single led indicator located on the far
right of the instrument.
- Medium battery charge status is indi-
cated by the illumination of the orange
led indicators or the illumination of the
led indicators at the centre of the in-
strument.
- Minimum battery charge status is indi-
cated by the illumination of the red led
indicators.
N.B.:
Do not use the machine when the led
indicator(s) are lit. Bring it to the battery
charging station as soon as possible.
4) Brush rotation enabling switch
This switch can be enabled by turning the
key (2) to its “1” position.
Press the switch down to enable the rota-
tion of the brushes; the brushes are con-
trolled by means of buttons (7) or (8), or
else by means of the levers (9), based on
the model. The button lights up when the
brushes are rotating.
5) Water solenoid valve switch
This switch can be enabled by turning the
key (2) to its “1” position and the switch
(4) to its “I” position.
Press the switch (5) to enable the water
solenoid valve for opening. The solenoid
valve itself is controlled by means of but-
tons (7) or (8), or else by means of the
levers (9), based on the model. The but-
ton lights up when the solenoid valve is
open.
Use the tap (6) to adjust the quantity of
water.
6) Water quantity adjustment tap
- Turn the tap (6) counter-clockwise to
increase the quantity of water or turn it
clockwise to decrease it.
7) Brush rotation activation button
With the key (2) in its “1” position and the
switch (4) in its “I” position, press this but-
ton to activate brush rotation and water
dispensing.
8) Drive mechanism and brush rotation
activation levers
With the key (2) in its “1” position and the
switch (4) in its “I” position, these levers
(9) activate the drive mechanism, brush
rotation and water dispensing.
Press the levers in direction “A” to acti-
vate forward movement;
press the levers in direction “B” to acti-
vate reverse movement.
… 54 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ghibli S1- 45M45 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ghibli S1- 45M45 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 12,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info