Manual Ghibli AS2 (page 13 of 88) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

505265

Zoom out

Zoom in

1/88

EN - 1

TECHNICAL FEATURES

Tension .................................. See data plate

Motor power .....................................1100 W

Noise level...................................... 62 dB(A)

Depression ................................210 mmH

Paper bag capacity .................................12 l

Dimensions ...............390 x 340 x 290H mm

Weight .................................................4.6 kg

Accessories ....................................Ø 32 mm

TYPE OF USE

This unit must solely be used to vacuum

dust, crumbs, etc. as it is designed solely for

this purpose.

HAZARD:

The manufacturer cannot be held liable

for any damage caused by improper or

incorrect use.

Any other use relieves the Manufacturer

from all responsibility of damage caused

to persons and/or things and renders the

warranty null and void.

INCORRECT USE

Do not use the unit to:

- vacuum any type of liquid;

- vacuumammable,explosive,corrosive

and toxic substances.

- vacuum hot substances.

Do not use the unit in explosive atmos-

pheres.

PREPARING THE UNIT

Checking the lter systems

- Release the levers (1 Fig.1) and remove

the cover (2 Fig.2) complete with the mo-

tor unit and cartridge filter (3 Fig.2).

- Check that the paper filter bag (4 Fig.3) is

in place inside the device.

- If the paper filter bag (4 Fig.3) is not

present, insert it by putting the square

cardboard stiffener into the slot in the

drum.

- Replace the cover and lock it using the

levers (1 Fig.1).

Assembling the pipes

- Insert the sleeve with bayonet connection

(5 Fig.4) into the hole (6 Fig.4) in the con-

tainer, aligning the connections present

in the sleeve with the slots (7 Fig.4) in

the hole in the container, then rotate the

sleeve clockwise to lock it.

- Hook the rigid extensions (8 Fig.5) to the

ergonomichandle(9Fig.5)oftheexible

pipe.

- Attach the desired accessory (floor tool,

dusting brush, crevice tool, multi-purpose

brush etc.) to the suction tube (9 Fig.5)

Using the telescopic tube

- The length of the telescopic tube (20 Fig.

16) can be adjusted as follows:

- To lengthen the tube, press down on the

ring nut (21 Fig. 16) and simultaneously

extract the top part (22 Fig. 16) of the

tube. Once the required length has been

obtained, release the ring nut (21 Fig. 16)

the tube will lock into the nearest locking

position;

- To shorten the telescopic tube, use one

hand to push the ring nut (21 Fig. 16)

down and the other to reinsert the top

tube (22 Fig. 16) into the lower sleeve (23

Fig. 16).

Multi-purpose brush

The multi-purpose brush should be used as

follows:

- To clean hard floors, parquet etc. press

the lever back (10 Fig.6) to remove the

bristles from the brush.

- To vacuum on carpets, rugs etc. press

the lever forward (10 Fig.6) to retract the

brush bristles.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ghibli AS2 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ghibli AS2 Manual

Product: