554991
7
Zoom out
Zoom in
Previous page
1/12
Next page
7
6.0 - USER MANUAL
- HANDSET DESCRIPTION.
GT889: 3 buttons with electronic key incorporated.
GT884N: multifunction button (Optional).
It integrates a sensor which keeps the “LINK” transmission
active. If the sensor doesn’t detect vibrations for more than
2 minutes, it reduces the transmissions and so the battery
consumption. Note: avoid falls and shocks to not damage
the sensor.
-Button: to arm and disarm the alarm system.
- Switch: to activate/deactivate the automatic transmission.
- MANUAL ARMING/DISARMING.
ARMING: press the “ON” handset button, the arming is confirmed by an indicators flash, by a beep and
by the constant RED LED switching on for 30 seconds, after it start flashing.
DISARMING: press the “OFF” handset button, the disarming is confirmed by two indicators flashes, by
two beeps and by the LED switching off (the system emits 4 flashes and 4 beeps if during the
“surveillance” an alarm has been detected
and 5 additional beeps if an anomaly is present ).
- AUTOMATIC TRANSMISSION ENABLING/DISABLING (ONLY WITH GT884N).
ENABLING: move the A switch to ON. To enable the “Link” function in the system carry out a manual
transmission (i.e. disarming).
To enable, activate the alarm system manually (i.e. arming).
DISABLING: move the A switch to OFF. To disable the “Link” function in the system carry out a
commutation with a remote control handset not in “Link” function.
- AUTOMATIC ARMING/DISARMING (ONLY WITH GT884N).
ARMING: going away from the motor vehicle the system arms automatically. The arming is confirmed
by an indicators flash, by a Beep and by the RED LED constant switching on for 30 seconds, after that
it starts flashing.
Note: with the GT884 remote control handset (“Link”) it is not possible to arm the system manually, it is
possible only to disarm it.
DISARMING: when you come back to the motor vehicle, to disarm the system it is enough to have with
you the remote control handset in “AUTOMATIC TRANSMISSION-LINK” mode and turn the ignition key
on. The disarming is confirmed by two indicators flashes, by two beeps and by the LED switching off
(the system emits 4 flashes and 4 beeps if during the “surveillance” an alarm has been detected).
- SHOCKS/MOVEMENT SENSOR ISOLATION (only with GT889).
In the first 5 seconds after the arming a press of the “ON” button deactivates the shocks/movement
sensor, the operation is confirmed by an indicators flash and by a Beep.
- PANIC FUNCTION
- After 10 seconds from the arming press the “ON” button for one second, a sound alarm starts with
the contemporaneous indicators flash with a duration of 30 seconds.
- Press a second time on the “ON” button to stop it.
LED
BUTTON
GT884
(Opzional)
LED
SERVICES
BUTTON
ON
OFF
GT889
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Getronic GT-970 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Getronic GT-970 in the language / languages: English as an attachment in your email.

The manual is 1,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info