554991
4
Zoom out
Zoom in
Previous page
1/12
Next page
4
4.0 - ALARM POSITIONING
5.0 - SET FUNCTIONS
The system is equipped with a “SET FUNCTIONS” which allows to program and customize
the alarm following to the user needs.
To access to the SET FUNCTIONS:
1 - The alarm must be disarmed.
2 - Switch the motor vehicle ignition on, place the GT889 handsets contacts to the receptacle
and check that 5 quick beeps are emitted and the RED LED will switch on constant. The alarm
is in SET FUNCTIONS mode.
3 - After 5 seconds starting from the function No.1a sequence of LED beeps corresponding to
the function are emitted, the LED flashes can be GREEN or RED to indicate the function state.
The sequential cycle of the LED flashes (from the function No.1 to the No.8) is repeated twice
and after you come out from the SET FUNCTION.
4 - To select a function switch on-off the motor vehicle in correpondance of the relative signal,
the LED illuminatesof the colour which corresponds to the function state (test excluded).
5 - Within 10 seconds change the the function setting out by the OFF handset button. The
setting out change is confirmed by the change of the LED colour and by a beep. After 10
seconds, starting from the last function selected, the function sequence will start again.
The system is equipped with a “SENSOR” which allows to detect possible motor vehicle shocks/
movement. For an optimum operation pay attention to the fixing positions indicated below.
YES
YES
YES
YES
YES
HORIZONTAL PLANE
YES
YES
NO
HORIZONTAL PLANE
HORIZONTAL PLANE
NO
MAX 10°
YES
YES
WARNING:
- Before carrying out the definitive fixing it is suggested to place temporary the alarm
and check the correct operation of the shocks/movement sensor.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Getronic GT-970 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Getronic GT-970 in the language / languages: English as an attachment in your email.

The manual is 1,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info