2014 GET by Athena. All rights reserved
Renesas RX62T Family 32 Bit RISC 100 MHz 100 MIPS microcontroller
Memory: 32 KB Data-Flash; 16KB RAM
Supply voltage: 13.5 VDC nominal (admitted range 9VDC – 24VDC)
Current consumption (on nominal voltage – with no connected loads and active alerts): < 70mA
LCD display with 1024 segments, transflective (positive FSTN)
Serial communication port RS 232
Programmable communication port CAN bus High Speed (1Mb/s, 500kb/s, 250kb/s, 125kb/s in format Intel
or Motorola)
Real-time clock with integrated backup battery (autonomy up to 1 month)
Integrated internal temperature sensor
Integrated tri-axial accelerometer (+/- 16g)
No. 2 analogic inputs (0-5 V)
No. 1 input for signals in frequency (up to 15 kHz)
No. 1 input for beacon devices
No. 1 output for open drain (maximum current 2.5 A)
No. 1 interface connector with MAIN Amphenol 12-pole wiring
No. 1 interface connector with AUX Amphenol 6-pole wiring
Programmable LCD backlight intensity
11 fully independent and programmable signalling/alert LEDs (surging channel, methods of ascension,
brightness)
2 buttons for access to system menus
External packaging of theft-proof and highly resistant plastic material
Software updatable configuration
PC updatable firmware
Protection: IP66
Weight (only dash): 385 g