797664
5
Zoom out
Zoom in
Previous page
1/82
Next page
5
16. Do not allow the device or power adaptor to wet.
17. If the device falls into water, immediately remove the power plug or power adaptor from
the socket. If the device is powered, do not put hands in the water. Have the device
checked by the qualified electrician before using it again.
18. Do not touch the device or power adaptor with wet hands.
19. Never use this device close to water, e.g.: under shower, in bathtube, or above
sink filled with water.
20. If the device utilises a power adaptor, do not cover it, because this can cause a
dangerous temperature rise and can damage the device. Always connect the power
adaptor cable to the device, and then connect the power adaptor to the power socket.
21. The shaver charging temperature should not be above 35 degrees Celsius or below 5
degrees Celsius.
22. Only the shaver head can be washed in water, the other parts of the shaver cannot be
immersed in water. Be careful, the hot water can cause burns to your hands.
23. Do not use towel or paper tissues for cleaning of shaver head, as they can damage the
head.
Device Description: Timmer Set
1. Trimmer Head 2.Power Button 3. Display 4. Design Trimmer 5. Precision trimmer 6.Nose / Ear trimmer 7. Foil Shaver
8. Sideburn / Eyebrow / Body trimmer 9. Length attachments for the precision trimmer. 10. The docking station 11. Machine Oil.
12. Cleaning Brush 13. Charging cable.
Trimmer Charging:
Before charging make sure, that the shaver is switched off. Charging takes about 1,5 hours. The shaver cannot be plugged into the
power socket for longer than 24 hours.
1. Connect the charger cable to the shaver (fig. 16).
2. The Display(3) will illuminate. And the % of load will show. When it reaches 100% please disconnect the charger.
3. After full charging of the shaver, unplug the charger from the power socket, then disconnect the cable from the shaver.
4. DO NOT use your shaver while charging
Using the device:
1. Make sure the device is not turned on and then insert the needed attachment onto the device.
2. Press the Power button (2). Press it a second time to the second speed.
3. After usage clean the attachment with the brush (12).
5. After several uses please oil the attachment with machine oil (11).
Attachment Usage:
1. Basic trimmer head (1)
This attachment is used to prune and keep the beard looking stylish. Intended for daily use.
To remove and attach please consult Fig. 1, 2, 3. When attaching please align the inside part shown in fig. 3 subpoint 2 with the device's
groove in the device shown in fig. 3 subpoint 1. And then press firmly towards the device until it clicks into place.
To add the length attachment please consult Fig. 11, 12. And then press firmly towards the device until it clicks into place.
To remove the length attachment please consult Fig. 7, 8.
4. Precision trimmer head (4)
This attachment is used for places that the basic trimmer is too big or too wide to reach without cutting parts of your facial hair you don’t
intend to cut.
5. Design trimmer head (5)
This attachment is used to adjust the length of your facial hair. You can change one of the 5 length attachments in set (9)
To remove and attach please consult Fig. 1, 2, 3. When attaching please align the inside part shown in fig. 3 subpoint 2 with the device's
groove in the device shown in fig. 3 subpoint 1. And then press firmly towards the device until it clicks into place.
To add the length attachment please consult Fig. 11, 12. And then press firmly towards the device until it clicks into place.
To remove the length attachment please consult Fig. 7, 8. This attachment has 1 attachment that has the option of regulation in 4
positions.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gerlach GL 2932 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gerlach GL 2932 in the language / languages: All languages as an attachment in your email.

The manual is 4.42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info