505208
10
Zoom out
Zoom in
Previous page
1/18
Next page
AUTO SCAN
SYSTEM B/G D/K I
STORAGE P1
SCAN Press MENU
9
TV SETUP
AUTO SCAN
MANUAL SCAN
FINE TUNE
MENU UP DOWN
Press MENU
Press MENU
EXIT
50
Insert one plug of the AC Power Cord in the jack of Power Input of the unit. Insert the other plug of AC Power
Cord to the suitable AC power socket with grounding. Then switch on the Power switch of this unit. The red
light of Power Indicator will be bright and the unit enter upon the stand-by status.
Press button on the remote controller or on the panel, the system will begin to work. The green light of
Power Indicator will be bright and the image appears on the screen.
When completing watching the broadcasting content of this unit, press button on the remote controller or
on the panel, the unit will come back to the stand-by status. The Power Indicator on the front panel will turn
into red from green.
Switch it off and pull out the plug of AC Power Cord.
Note: Most part of this circuit is digital. If there is any abnormal phenomenon, please pull out the plug
of Power Cord to switch off, and then switch on after 2 minutes. If the set still can not work
normally, please execute Reset procedure on Page 4 or contact the Service centre.
IX. Basic operation
2. Select the receiving signal input status
Press the TV/AV button. And the menu will appear.
Select the desirable signal by pressing P+ or P-.
Press MENU to confirm the selection.
1. Power on / off operation.
1 Auto scan
Press TV/AV button on the remote controller or on the
panel to select the TV status.
Press MENU button on the remote controller or on
the panel .
Press P+ or P- button to get TV SETUP menu,
the menu (a) will appear on the screen.
Press MENU button to enter, then press P+ or P-
button to select AUTO SCAN item.
Press MENU button to enter. The menu(b) will
appear on the screen.
Press P+ or P- button to select SYSTEM item,
press V+ or V- button to adjust TV standard.
Press P+ or P- button to select STORAGE item,
press V+ or V- button to adjust program
number.
Press P+ or P- button to select SCAN item, press
MENU button to confirm. The unit will
begin the automatic search and store.
2 Manual scan
Press P+ or P- button to select MANUAL
SCAN item on TV SETUP menu.
Press MENU button to enter. The menu(c)/(d) will
appear on the screen.
Press P+ or P- button to select SYSTEM item,
press V+ or V- button to adjust TV standard.
Press P+ or P- button to select STORAGE item,
3. How to receive and watch the TV signal correctly
EDIT
Press MENU
UP DOWN LEFT RIGHT EXIT
MANUAL SCAN
SYSTEM B/G
STORAGE P1
BAND V/UHF
CHANNEL 2
UP DOWN LEFT RIGHT EXIT
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gericom GTV2610 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gericom GTV2610 in the language / languages: English as an attachment in your email.

The manual is 2,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gericom GTV2610

Gericom GTV2610 User Manual - German - 18 pages

Gericom GTV2610 User Manual - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info