712058
17
Zoom out
Zoom in
Previous page
1/112
Next page
Do not use the pulse oximeter in an MRI or CT environment.
The pulse oximeter must be kept out of reach of children. Small
parts can be detached from the device. These can be swallo-
wed by children or cause suffocation by inhalation of the parts.
Operating Geratherm oxy control can be inuenced by the use
of an electrosurgical unit (ESU).
Do not use the pulse oximeter in situations where alarms are
required. The device has no alarm. It is not suitable for con-
tinuous monitoring. Explosion Hazard: Do not use the pulse
oximeter in an explosive atmosphere.
Do not use the device if it has damaged partsExplosion hazard:
Do not use the pulse oximeter in an explosive atmosphere.
The pulse oximeter is provided only as an aid for patient dia-
gnosis. It must be used in conjunction with other methods of
assessing clinical signs and symptoms.
Prolonged use or the patient‘s condition may require changing
the sensor site periodically. Change the sensor site and check
skin integrity, circulatory status, and correct alignment every
4 hours.
Inaccurate measurements by autoclaving, sterilizing with ethyl
oxide or immersing the sensors in liquid may cause inaccurate
readings.
Keep the oximeter in a dry environment.
The following factors can affect the SpO
2
measurements and
lead to inaccurate values:
Signicant levels of dysfunctional hemoglobin (such as
carboplatin hemoglobin or methemoglobin)
Intravascular dyes such as indocyanine green or methy-
lene blue
High ambient light (the sensor area protected from direct
sunlight)
Excessive patient movement
Venous pulsations
Placement of a sensor on an extremity with a blood pres-
sure cuff, an arterial catheter or intravascular line
Patient has hypotension, severe vasoconstriction, severe
anemia, or hypothermia
Patient has a cardiac arrest or is in shock
Nail polish or articial ngernails
Too cold or dirty ngers
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
PRECAUTIONS
!
EN
Geratherm
®
pulse oximeter is a portable non-invasive device
intended for spot-checking of oxygen saturation of arterial he-
moglobin (SpO2) and pulse rate of adult and pediatric patients
in hospitals, hospital-type facilities, and home environments. It is
not for continuous monitoring.
APPLICATION OF THE PRODUCT AND INTENDED USE
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Geratherm GT-300C203 - Oxy Control at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Geratherm GT-300C203 - Oxy Control in the language / languages: English, German, Dutch, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 20,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info