558403
14
Zoom out
Zoom in
Previous page
1/15
Next page
14
“NOTE”: This potential damage is not included under the warranty.
If rechargeable batteries are used, the selector can be in the “Rechargeable” or “Alkaline” position. However, the
recharging function of the batteries is activated only if the selector is in the
“Rechargeable” position.
Before remounting the battery pack, check that the contacts are clean and dry. Make sure that the rubber seal of the
housing and the rubber O-rings of the mounting screws are clean and positioned correctly.
Incorrect positioning of the seals or the presence of sand, salt residue or soiling can compromise the
seal of the battery pack, allowing moisture to penetrate the instrument, resulting in damage to the internal electronics.
“NOTE”: This damage is not covered by the warranty.
Reinstall the battery pack by performing the removal procedures in the opposite order. If the battery pack does not slide
into the housing or is difficult to insert, check that the CompactFlash is inserted properly and all the way in. It is
possible to use the instrument with the batteries only or connected to a fixed power source. During operation with the
power cord inserted, the internal batteries - if rechargeable - are recharged after the battery charger inside deactivates
automatically. A complete charge cycle of a set of completely dead batteries requires at least 2 hours, depending on the
type and the state of the batteries.
CARTRIDGE INSTALLATION
Installation of the CompactFlash™: Remove the battery pack, insert the cartridge into the special housing with the
label side (the side with the small arrow) turned inward and push sideways until it slides all the way in. Insert the new
battery pack as illustrated in the "Battery Pack" section and check that it is closed tightly to avoid water from seeping in.
Removal of the CompactFlash™: Do this operation in a dry area with the machine off. Remove the battery pack then
remove the cartridge making it slide sideways.
“NOTE”: always use CompactFlash™ cartridges certified by Navionics. Use of uncertified cartridges can lead to
instrument malfunctioning. CompactFlash™ cartridges, including the cartridges used by this instrument, can be used as
mass storage on any personal computer. Remember that to ensure correct operations of the instrument, the cartridge
must have a certain quantity of free space available for the data of the instrument. Before using a new cartridge, make
sure that it has at least 2.5 MB of free space.
use caution when accessing the files of the cartridge with your PC.
Microsoft Windows makes it possible to easily delete and move files. Thus, pay extra attention to avoid deleting files
from the \NAVIONICS and \GEONAV directories in the cartridge. Moving around or deleting these files can cause
irreversible damage to the map and cause the instrument to malfunction.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Geonav 4C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Geonav 4C in the language / languages: English as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Geonav 4C

Geonav 4C User Manual - Dutch - 83 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info