522270

Geonav 11 Sunshine Manual

16
Zoom out
Zoom in
Previous page
1/38
Next page
offered by Busse-Yachtshop.com
30 31
To enable these functions, rotate the knob to display the EBL,
position the line on the bearing desired, then press the knob
to enable the VRM ring and adjust its size by rotating the knob
so as to reach the range desired. To edit the values set, press
the knob to switch from the VRM function to the EBL func-
tion. Press MARK to insert a marker where the EBL and VRM
intersect, and ENTER to insert a waypoint.
Range and bearing values are displayed in the top left-hand
corner of the screen, together with the indication of the func-
tion currently enabled.
Press CLR to disable the two functions in sequence.
The VRM ring can also be used to set the range for navigation
from the coast, for example to avoid navigating out of the limit
allowed. In this case, set the EBL to any value, adjust the
VRM ring size as desired, then navigate making sure that at
least one point in the ring is always touching the coast.
Easy Pilot function
The Easy Pilot function allows editing temporarily a route set
and followed by the autopilot, but keeping the route unchanged.
This function is useful to make corrections at
once (e.g., because of other boats or to approach
points of interests), without having to edit the
route planned or disable the autopilot.
To enable this function, rotate the knob and
position the EBL on the new route to follow,
then press ENTER. The EBL will change color,
as the boat starts following the new route; the
planned route will be abandoned, although dis-
played. To go back to the planned route, thus
canceling the temporary correction, press CLR.
NOTE: The Easy Pilot function can be enabled only if a route is present.
To enable the Autozoom function, press ZOOM+ until the
“AUTOZOOM ? ENTER = YES” message is displayed, then
confirm by pressing ENTER. To disable the Autozoom function,
press ZOOM.
When the GEONAV is turned on, and if at least one waypoint
has been previously entered, the Autozoom function will be
automatically enabled.
Screen Amplifier
This function automatically re-
draws the chart according to the
boat’s course, so as to maintain
2/3rds of the screen ahead of the
boat, provided that the boat’s
speed is greater than 3 knots.
To enable/disable the Screen
Amplifier function, press the
PAGE key to display the menu, se-
lect SETUP, the SCREEN AM-
PLIFIER option, then ON or OFF.
This function will be enabled pro-
vided that no waypoint has been
previously entered.
EBL/VRM functions
The EBL (Electronic
Bearing Line) and VRM
(Variable Range
Marker) functions al-
low entering markers
and waypoints as range
and bearing coordi-
nates with respect to
the current position.
Advanced
Functional Characteristics
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Geonav 11 Sunshine at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Geonav 11 Sunshine in the language / languages: English as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info