522271
31
Zoom out
Zoom in
Previous page
1/38
Next page
offered by Busse-Yachtshop.com
60 61
Deleting a marker
Position the cursor on the marker to delete and press CLR.
NAVIGATION MODE
Inserting a marker
Press the MARK key to insert a marker at the boats position. A
window will display the symbol and the name automatically
assigned to the marker; to change the marker symbol, name
and color according to the type of marker to store (e.g., fishing
spots, submerged wrecks, rocks, etc.), use the joystick and
the -ZOOM+ key.
Press ENTER to confirm the insertion.
Route to a marker
See the GOTO functions.
MAIN MENU
Storing a set of markers in the CompactFlash™
Press the PAGE key to display the menu, select MARKER, then
STORE and press ENTER. Use the joystick to change the de-
fault name and confirm.
The MRK. STORED message
will confirm that markers have
been stored correctly. Once
stored, markers will disappear
from the screen.
Each time a set of markers is
stored in the CompactFlash, the
plotter memory is cleared and the
indicator of the markers available
is reset to the maximum value.
Recalling a set of markers from the CompactFlash™
Press the PAGE key to display the menu, select MARKER and
then RECALL to open the marker catalog.
Advanced
MARKERS
Markers are used to identify points of interest to which names
and symbols can be assigned.
When a marker is entered, the plotter records also date, time
and sea depth and temperature (if available). This data is stored
together with the marker name, symbol and color and can be
displayed in the window shown by the GOTO MRK menu.
NOTE: Marker names are displayed starting from the 32 NM chart range.
CURSOR MODE
Inserting a marker
Move the cursor to the position
desired and press the MARK key.
A window will display the sym-
bol and a name automatically as-
signed to the marker.
Use the joystick and the -ZOOM+ key to change the marker
symbol (8 symbols available), name (max. 8 characters) and
color according to the type of marker to store (e.g., fishing
spots, wrecks, rocks, etc.).
Press ENTER to confirm the insertion.
NOTE: The cursor can be moved to the desired position also by using most of the
GOTO functions. See the GOTO Section for further details.
Changing a marker name/symbol/color
Position the cursor on the marker desired and press ENTER; a
window will display the symbol, the name and the color pre-
viously assigned to the marker selected. Use the joystick and
the -ZOOM+ key to change the marker name, symbol and color.
Press ENTER to confirm the operation.
Flash
Sunshine
Flash
Sunshine
Markers
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Geonav 11 Sun at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Geonav 11 Sun in the language / languages: English as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info