526927
14
Zoom out
Zoom in
Previous page
1/24
Next page
14
12. Current transformer installation
The following steps shall be performed only by a qualified electrician. Unless the previous section was
carried out by the customer already, you only need this section - in addition to the general safety
information – to be respected by the professional.
This step assumes that the previous chapter has been conducted successfully.
Step 1:
For safety reasons, it should be checked whether a radio link between the display and transmitter is
established (small box with connections for the current transformers). This is the case if the symbol shown
on the display lights.
If the symbol is flashing:
Check batteries: weak batteries result in reduced transmission power of the transmitter
Interrupt power to the display briefly: simple communication problems are cleared by restarting.
Reduce the distance between display and transmitter: the range is usually 30 meters indoors and overcomes two
walls or ceilings. Environmental factors or characteristics of the building may reduce the range.
Check for metal objects near to the transmitter or display: metallic objects reduce the radio signal range.
Check for household appliances in operation, which could cause interference in the frequency band: some
household appliances may interfere with the ENSEMBLE devices (light dimmers, hairdryers, electronic heating
thermostats with wireless modules, etc.).
If no radio connection can be established, reset the radio network and restore the radio connection (PAIRING)
manually (see relevant chapter in the manual).
Step 2:
The current transformers can be integrated in all 230 V installations as follows.
The current transformers should be connected meter to the wires of all individual phases next to the utility meter
to safely measure all loads to be measured by the meter..
The direction of current through the transformer is not important, but it should be the same for all sensors.
The sensors can be connected to the transmitter in any order.
On the display you should see consumption now. If no consumption appears, please check cabling, control the radio
link (see step 1 of this chapter), see the Troubleshooting section.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for GEO Ensemble PCK-EN-005 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of GEO Ensemble PCK-EN-005 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of GEO Ensemble PCK-EN-005

GEO Ensemble PCK-EN-005 User Manual - German - 24 pages

GEO Ensemble PCK-EN-005 User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info