510655
6
Zoom out
Zoom in
Previous page
1/42
Next page
6
5. Using the Line In input
1. Use a cable with a 3.5mm jack to connect the Geneva Sound
System to any audio device that has an audio out connector.
First connect the cable to the source, then connect the cable
to the Line In connector located on the back panel of the
Geneva Sound System.
2. Switch the Geneva Sound System to iPod mode using
the key and activate the connected audio source. Note
that you cannot control any connected device using the
Geneva Sound System remote control.
3. Adjust the output volume of the connected device.
Note: If an iPod is docked and playing, the iPod sound and the
external audio will be mixed.
6. Using the Alarm
How to set the Alarm?
1. Push the key on the remote control: a blinking „A“ should
appear on the display.
2. Select the desired alarm time using the and keys on
the remote control or on the cabinet.
3. Push again the key on the remote control to store the alarm
time; „A“ indicates alarm active.
Note: An alarm can be set only if the clock has been adjusted as
described above in Chapter 1.
The alarm will use the latest mode and setting. If the audio level
is too low, or the volume is set to 0, an internal beep tone is
activated.
How to switch the Alarm on and off?
Use the key to activate / deactivate the alarm; „A“ indicates
alarm active.
How to snooze and acknowledge the Alarm?
While the alarm is active, touch whatever key of the touch panel to
snooze the alarm for ten minutes. To acknowledge the alarm push
any key on the remote control. Without acknowledge the unit will
automatically go to stand-by mode after playing for 20 minutes.
7. Troubleshooting, Service and Support
How to change the remote control battery?
1. Open the battery lid of the remote control.
2. Remove the used battery and replace it with a new lithium cell,
3 V battery (CR2025 type).
3. Respect the polarity indication.
Troubleshooting and Support:
1. If the system does not work as expected, first carefully read this
manual.
2. If the problem persists, you can access our troubleshooting
Step 1
Step 2 + 3
database available on the web at www.genevalab.com and
select support page.
3. If still not successful, contact our customer support.
Service and Repair:
If the product is damaged and needs repair, please contact Geneva
Lab by phone or email to be referred to an authorized service
center. For repair under the limited warranty period, see terms on
the web at www.genevalab.com and select support page or consult
your dealer.
Customer Service:
see Geneva Lab Website www.genevalab.com and select
support page for your local support number.
8. Made for iPod & Technology Partners
The “Made for iPod” and „Works with iPhone“ logos indicate that
this product has been designed specifically to work with iPod and
the iPhone.
The manufacturer certifies that this accessory has been made in
accordance with the high standards of quality and performance that
you expect from iPod and Apple.
Technology Partners:
Geneva Lab Corporation uses some of the world’s leading devel-
opers of audio technologies to make the Geneva Sound System a
very advanced product.
“EmbracingSound™ is the technology for consumers and professi-
onals alike to experience sound. As EmbracingSound™ is utilizing
two very closely spaced speakers you will experience what is really
in the recording with better resolution and clarity than ever before.
Just sit back and experience all your music and you will most pro-
bably find new favorites as well as making excursions in to music
genres that you where totally unfamiliar with before. Just let the
experience guide you!
More details can be found on the www.genevalab.com website.
9. Technical Specifications
For detailed technical specifications for this product, please visit
our website (www.genevalab.com) and select support page, where
you can download the detailed technical specifications for any of
our products.
© 2009 G-Lab GmbH. All rights reserved
Under the copyright laws, this manual may not be copied, in who-
le or in part, without the written consent of G-Lab GmbH.
Geneva™ is a trademark of G-Lab GmbH.
iPod is a trademark of Apple Computer, Inc. registered in the U.S.
and other countries.
The trademark EmbracingSound™ and the Embracing Sound
Experience logo are owned by Embracing Sound Experience AB.
Geneva Sound System Model S, User Manual, Version v1.0
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Geneva Model S DAB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Geneva Model S DAB in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info