Manual Geneva Model M (page 5 of 42) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

510656

Zoom out

Zoom in

1/42

English

2. Listening to the iPod

Step 1. To use the Geneva Sound System with an iPod, select

iPod as the audio source using the or key: The display

under the grille should display “no iPod”.

Step 2. Insert the correct iPod adapter: Attach the Dock Adapter

to the iPod Universal Dock by pressing lightly on the top of the

Dock Adapter (see picture) and it will snap in:

How to select the right iPod adapter for my iPod?

Use the iPod adapter provided with your iPod. Only if an

iPhone has to be docked, use the iPhone adapter provided

with the Geneva Sound System.

Step 3. Insert the iPod into the iPod dock. The display should now

show „iPod“.

Step 4. Press the key on the remote control or on the Touch-

Light panel. If you still cannot hear any sound, check that the volu-

me is turned up by adjusting the key or the TouchLight wheel.

Step 5. You can control your iPod using the , , keys

on your remote control or the TouchLight controls on the system.

Step 6. The key on the TouchLight offers full control of the

iPod menu levels. Tap the menu key to navigate through iPod op-

tions. The TouchLight wheel is used to move up and down within a

menu. To select an item, tap the wheel.

Charging: Your iPod is charging while the system is connected to

an AC plug.

How to adjust volume and sound?

1. Use the , , , , , keys on the remote

control (or the touch panel wheel for the volume only) to adjust

sound and volume.

2. Volume: 0 means silence, 100 means maximum output.

3. Treble and Bass: -6 means very little Bass or Treble, 0 means

neutral, 6 means maximum effect.

4. If you turn the device off, the current values are stored.

3. Listening to the FM radio

Step 1. Select FM radio as the audio source using the or

key on on the remote control or on the TouchLight; the display

under the grille should display an FM frequency, e.g. “103.2”. If

you cannot hear any sound, check the volume setting by pressing

the key.

Step 2. Select an FM station with the and keys: one click

increases or decreases the frequency by 100 kHz. The number on

the display under the grille indicates the current frequency in MHz

(e.g. “88.7“ on display means 88.7 MHz). Hold down the or

the key and the FM radio will search for the next station au-

tomatically. When a station has been found, the automatic search

stops. To keep scanning, repeat this action.

How to switch between mono and stereo?

Press the button for 1 second to toggle between mono and

stereo mode.

How to store / recall a radio station (presets)?

1. Select your favorite radio station using the or keys on

the remote control or on the TouchLight.

2. Select one of the 6 preset keys on the remote control, and keep

pressing it until the corresponding letter on the display starts

blinking. The station has now been stored and can be recalled by

pressing the same preset key.

How to erase or overwrite a preset?

Stored presets do not need to be erased - just use the previous

steps to store a new station in a preset.

4. Using the Line Input

1. Use a cable with a 3.5mm jack to connect the Geneva Sound

System to any audio device that has an audio out connector.

First connect the cable to the source, then connect the cable

to the Line In connector located on the back panel of the

Geneva Sound System.

2. Switch the Geneva Sound System to Line in mode using

the on the TouchLight or key and activate the

connected audio source. Note that you cannot control any

connected device using the Geneva Sound System remote

control, just the volume settings.

3. Adjust the output volume of the connected device.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Geneva Model M in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Geneva Model M Manual

Product: