503381
13
Zoom out
Zoom in
Previous page
1/38
Next page
15
LNB TYPE
Select LNB type (single, dual, universal1, universal 2).
Single LNB low frequency can be 5150, 9750, 10600, 10750, 11475MHz.If the required LNB
Frequency is not available, then enter the frequency manually using the Numeric buttons (0~9).
Dual LNB low and high frequency can be 5150, 9750, 10600, 10750, 11475MHz.If the re-
quired LNB Frequency is not available, then enter the frequency manually using the Numeric
buttons (0~9).
When you select Universal 1 it switches between 9750 and 10600MHz automatically. The
“22KHz Tone” setting is unnecessary. (Disabled)
22KHZ TONE
Used for two or more antennas or LNBs.
DiSEqC INPUT
If you use several antennas or LNBs, connected to the STB with DiSEqC switch, in this item
you have to select parameters for DiSEqC A-D (1-4) or TonBurst A B.
For correct operating with multiswitch system, supporting DiSEqC 2.0, or analogue operating
(0/22 KHz, 13/18 volt, tone impuls) it is imperative:
– Either give DiSEqC-switch combination - DiSEqC A, DiSEqC B etc.;
– Or give analogue operating combination - TonBurst A, TonBurst B.
To change operating from DiSEqC for analogue do what recommended for particular switch.
Please, note: DiSEqC 2.0 is controlled similar to DiSEqC 1.0.
DiSEqC 1.1 input*
During use of selector switches DISEqC 1.1
and DISEqC 1.0 one can connect up to 16
antennas to receiver.
Connect selector switches in accordance with
diagram. Select at items DiSEqC input and
DiSEqC 1.1 input corresponding inputs.
LNB POWER
On/off LNB power.
MOTORIZED SYSTEM
If you use Motorized System for antenna op-
erating with USALS, set USALS in this item. If
you use Motorized System for antenna operat-
ing with DISEqC 1.2, set « DISEqC 1.2» in this
item.
INSTALLATION
*This function may not be equipped in some SW versions.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for General satellite FTA-7001S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of General satellite FTA-7001S in the language / languages: English as an attachment in your email.

The manual is 1,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of General satellite FTA-7001S

General satellite FTA-7001S User Manual - German - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info