503384
22
Zoom out
Zoom in
Previous page
1/31
Next page
You can update STB Software and database through the serial
input-output port RS-232 on the rear panel of the STB. You
can do this using a PC or another STB.
PC TO STB SOFTWARE UPDATE
Whenever a problem is found with this software or extra
functions or enhanced applications are added, the software in
the equipment must be upgraded. In order to maintain proper
performance of the product, it is essential to have the most
up-to-date software. The latest news and release of software
versions may be found at the following website – http://www.
gsint.tv/ It is recommended that you periodically check for the
availability of software upgrades.
PC TO STB SOFTWARE/DATABASE UPDATE THROUGH serial input-output port RS-232 USING GS BURNER
– Switch off the STB.
– Connect the PC to the STB by RS-232-cable.
– Install and run the GS Burner utility on your PC (You can download it on our website http://www.gsint.tv).
Find and Open upg-file in the GS Burner utility (software version/database file corresponding to your area you can
download on our website http://www.gsint.tv).
– Press Start on your PC.
– Turn on the STB.
The download process and error codes will be shown on the STB front panel and in the GS Burner window.
If the download is successful the “b. 100” figure must be shown on STB front panel. The STB will be restarted with
the new version of the software.
If there is an error during the download process, then an error code will appear on the STB’s front panel and the
error decoding will appear in the GS Burner window. The meaning of mistake is described in the table 1. The STB
will be restarted using the old version of the software.
Warning: Do not turn off the STB while downloading. Connect the PC to the STB by RS-232-cable when the power
is off.
STB TO STB SOFTWARE/DATABASE UPDATE THROUGH SERIAL INPUT-OUTPUT PORT RS-232
Warning: This method is valid only if the set-top boxes have the same hardware version (it can be checked in the
Status Menu).
– Switch off the STBs.
– Connect the STB to the STB by RS-232-cable.
– Power on the source STB; select “Installation” – “Data Transfer”, press the blue button. To update only
database press “0” (Zero) before ; to update only software press “1” before .
– Power on the destination STB. If it was turned on earlier select “Installation” – “Data transfer” and press the
red button. Confirm your choice.
DATA TRANFER
U
H
F
24
i
U
H
F
U
H
F
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for General satellite CI-7100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of General satellite CI-7100 in the language / languages: English as an attachment in your email.

The manual is 2,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of General satellite CI-7100

General satellite CI-7100 User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info