503384
14
Zoom out
Zoom in
Previous page
1/31
Next page
For Positioner setup to satellite you should:
– Select a satellite, from wich you’re going to
search the services.
– Select a transponder. STB will search the
satellite, using data of the chosen transponder.
Please, note: You must be sure that the cho-
sen transponder has sufficient signal power in
your region and high symbol rate.
After that press the blue button (signal
search) and select the direction for the an-
tenna, using buttons (West or East).
The antenna will automatically start moving to
the selected direction, until find the signal of
the chosen transponder. As soon as the signal
is found, it is necessary to adjust it manually
to get the best quality of the signal. For it
move the cursor to buttons
and pressing and holding the button /
try to get maximum value in signal strength/quality scales.
– Press the green button to save the position.
If satellite position was saved in the STB before, than press the yellow button and enter
the number of the position. Press to verify your choice. After you select Service Search the
box Automatic Search will open.
ADDITIONAL POSITIONER SETUP
To enable eastern/western limit for antenna set the antenna in the outermost eastern/western
position. After that in the menu “Additional positioner setup” select the limit (eastern/western)
and press the green button. To disable the limit press the red button.
To move antenna in the initial position select “Move to Zero” and press the green but-
ton.
Command “re-count/evaluate” is individual for every positioner (the green button). *
Please, note: It is possible to combine the DiSEqC switch and motorized antenna, operated by
the DiSEqC 1.2 in the set-top box.
POSITIONER SETUP
* This function may not be equipped in some SW versions
INSTALLATION
U
H
F
?
i
?
16
OK
?
?
/
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for General satellite CI-7100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of General satellite CI-7100 in the language / languages: English as an attachment in your email.

The manual is 2,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of General satellite CI-7100

General satellite CI-7100 User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info