503384
5
Zoom out
Zoom in
Previous page
1/31
Next page
DiSEqC — provides STB interaction with other equipment. To transmit commands it uses particu-
lar 22 kHz signal and interval combinations.
The STB supports DiSEqC 1.0 and DiSEqC 1.2
SATELLITE ANTENNA WITH DISEQC 1.0
You can connect a single satellite antenna directly to the set-top box. DiSEqC 1.0 allows multiple
antennas to be connected to the STB simultaneously. If you have two or more fixed antennas or
LNBs, you can use a DiSEqC 1.0 switch.
1. Connect the coaxial cable from the first LNB to the LNB 1 or LNB A input connector of the
DiSEqC switch.
2. Connect the coaxial cable from the second LNB to the LNB 2 or LNB B input connector of
the DiSEqC switch.
3. Do the same for other LNBs.
4. Connect one end of a coaxial cable to the RF OUT connector of the DiSEqC switch and the
other end to the LNB IN socket on the STB.
SATELLITE ANTENNA WITH DISEQC 1.2
DiSEqC 1.2 - controls the motorized system.
1. Connect the coaxial cable from the LNB of your motorized system to the LNB IN socket on the
STB and the other to the “REC” or “STB” connector on the DiSEqC 1.2 motor.
2. Connect the coaxial cable from the LNB to the LNB IN connector on the DiSEqC 1.2 motor.
Please, note: the motorized system can have different configurations. For more details, please,
refer to its manual.
OTHER EQUIPMENT CONNECTION
7
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for General satellite CI-7100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of General satellite CI-7100 in the language / languages: English as an attachment in your email.

The manual is 2,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of General satellite CI-7100

General satellite CI-7100 User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info