1 - 2
Owner's Manual
Getting Started
WX400 ASSEMBLY INSTRUCTIONS
HOW TO ASSEMBLE YOUR WX400 PIANO WORKSTATION
1. Remove parts A, B, C, F from the packing and accessories D, E, G, H from the plastic
bag.
2. Fix the pedal cross-bar B to the flanks C with the bolts D, using the hexagonal rod
spanner E, as shown in Fig. 1. The pedals cable must be passed through the rear
loophole, as shown in Fig 1 bis.
3. Fix the bass reflex box A to the flanks C with the bolts D,
using the hexagonal rod spanner E, as shown in Fig. 1.
7. Place the instrument in its definite loca-
tion and adjust the adjustable leg K
under the pedals cross-bar until it rests
firmly on the floor.
4. Place the cabinet F on top of the assembled base,
fixing it into position with the thumb screws G, as
shown in Fig. 2.
5. Attach the 4 adhesive clamps H (two at the back of
the inner right flank and two under the cabinet), and
clamp the pedals cable as shown in Fig. 3.
6. Insert the pedals and speakers jacks into their
respective rear panel sockets as shown in Fig. 3.
D
ASSEMBLY LIST:
A. BASS REFLEX BOX.
B PEDALS CROSS BAR.
C. RIGHT/LEFT FLANKS WITH BASS.
D. 8 HEXAGONAL RECESSED
BOLTS.
E. HEXAGONAL ROD SPANNER.
F. CABINET.
G. 4 THUMB SCREWS.
H. 4 ADHESIVE CLAMPS.
