663034
29
Zoom out
Zoom in
Previous page
1/320
Next page
Get started 1•13
Get started 1•13
This section takes you through the basic steps
required to record a simple multi-track Song and
save it to disk.
For detailed explanations on Song, Song/Style
and Style recording and editing, refer to the ap-
propriate chapters of the Reference Guide.
RECORD THE SONG
1. Press the REAL SONG button in the STYLE/SONG
GROUPS section.
The display shows the available Song Group
locations as “Free”.
2. Select a FREE location.
Use the corresponding Function button. WK3
now sets to Song Mode. One of the tracks
(shown flashing in the Sequencer) will be
active to play in real time.
3. Press RECORD in the SEQUENCER section.
The leds of the RECORD button and the
Track 1 button start to flash. The display also
shows track 1 (Program Change) flashing,
indicating that it is in “record pending” status.
Track 1 will play a Drumkit.
©
Note: Track 1 is assigned a Drumkit and MIDI
Channel 10 by default, in order that you can record
a Song that complies with GM standards.
©
Note: The Song can be given a name using
the PERF NAME function in the Edit Performance
section. The procedure is explained in detail in the
«Sounds and Performances” chapter 4.
Record a Song & save it to disk
1
2
3
This section takes you through the basic steps
required to record a simple multi-track Song and
save it to disk.
For detailed explanations on Song, Song/Style
and Style recording and editing, refer to the ap-
propriate chapters of the Reference Guide.
RECORD THE SONG
1. Press the REAL SONG button in the STYLE/SONG
GROUPS section.
The display shows the available Song Group
locations as “Free”.
2. Select a FREE location.
Use the corresponding Function button. WK3
now sets to Song Mode. One of the tracks
(shown flashing in the Sequencer) will be
active to play in real time.
3. Press RECORD in the SEQUENCER section.
The leds of the RECORD button and the
Track 1 button start to flash. The display also
shows track 1 (Program Change) flashing,
indicating that it is in “record pending” status.
Track 1 will play a Drumkit.
©
Note: Track 1 is assigned a Drumkit and MIDI
Channel 10 by default, in order that you can record
a Song that complies with GM standards.
©
Note: The Song can be given a name using
the PERF NAME function in the Edit Performance
section. The procedure is explained in detail in the
«Sounds and Performances” chapter 4.
Record a Song & save it to disk
1
2
3
Downloaded from www.Manualslib.com manuals search engine
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for General Music WK3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of General Music WK3 in the language / languages: English as an attachment in your email.

The manual is 10,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info