663034
24
Zoom out
Zoom in
Previous page
1/320
Next page
1•8 User Guide
1•8 User Guide
REGULATE THE GENERAL EFFECT
VOLUMES AND ACTIVATE LOUDNESS
It is possible to regulate the general effect vol-
umes to suit the surroundings and activate the
Loudness function.
Although each Performance recalls appropriate
effect volume settings and mixer settings for each
track, a general setting can be applied to render
the effects more or less intense with a single com-
mand.
The Loudness control introduces a particular
equalisation (a simultaneous control of the Bass
and Treble tones - similar to that found on home
stereo units). When Loudness is ON, it favours
certain frequencies at low volume.
1. Press the GENERAL button (close to the EDIT PER-
FORMANCE section).
The first page of Edit General is opened.
2. Press the PAGE+ button once.
3. Select the parameters with the Function buttons:
Rev=Reverb (F1/F2), Eff=Effect (F3/F4),
Loud=Loudness (F5/F6).
4. Modify the selected parameter with the Dial.
©
Hint: You can use the F1-F2, F3-F4 sliders to
change the parameter values directly without
selecting them. The Loudness control can be
switched ON and OFF by toggling with the F5 or F6
Function buttons.
5. Press ESCAPE per return to the default display.
The settings remain in memory (RAM) after
turning off the instrument.
1/2
3/4
5
REGULATE THE GENERAL EFFECT
VOLUMES AND ACTIVATE LOUDNESS
It is possible to regulate the general effect vol-
umes to suit the surroundings and activate the
Loudness function.
Although each Performance recalls appropriate
effect volume settings and mixer settings for each
track, a general setting can be applied to render
the effects more or less intense with a single com-
mand.
The Loudness control introduces a particular
equalisation (a simultaneous control of the Bass
and Treble tones - similar to that found on home
stereo units). When Loudness is ON, it favours
certain frequencies at low volume.
1. Press the GENERAL button (close to the EDIT PER-
FORMANCE section).
The first page of Edit General is opened.
2. Press the PAGE+ button once.
3. Select the parameters with the Function buttons:
Rev=Reverb (F1/F2), Eff=Effect (F3/F4),
Loud=Loudness (F5/F6).
4. Modify the selected parameter with the Dial.
©
Hint: You can use the F1-F2, F3-F4 sliders to
change the parameter values directly without
selecting them. The Loudness control can be
switched ON and OFF by toggling with the F5 or F6
Function buttons.
5. Press ESCAPE per return to the default display.
The settings remain in memory (RAM) after
turning off the instrument.
1/2
3/4
5
Downloaded from www.Manualslib.com manuals search engine
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for General Music WK3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of General Music WK3 in the language / languages: English as an attachment in your email.

The manual is 10,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info