503367
21
Zoom out
Zoom in
Previous page
1/28
Next page
Page17
owners manual
gk360
The Transpose
The TRANSPOSE function allows you to change the pitch of the instru-
ment in semitone steps, up to a maximum setting of 12 semitones above
or below standard pitch. If you press either the [+] or [-] TRANSPOSE
buttons once only, the display shows the normal pitch setting (00).
Press the [+] or [-] TRANSPOSE buttons repeatedly to raise or lower the
pitch in semitone steps until you reach the value required. The cancel
the Transpose setting and restore normal pitch, press both [+] and [-]
TRANSPOSE buttons at the same time.
Tune
The TUNE function allows you to fi ne tune the instrument in steps on one
cent at a time (cent = one hundredth of a tone). If you press either the
[+] or [-] TUNE buttons once only, the display shows the normal tuning
setting (00) corresponding to the standard A = 440 Hz. Press the [+] or
[-] TUNE buttons repeatedly to raise (max: 50) or lower (max: 50) the
tuning until you reach the value required. The cancel the Tuning setting
and restore normal pitch, press both [+] and [-] TUNE buttons at the
same time
Pan
The PAN function allows you to change the stereo pan position of the
overall sound, moving the sound at the speakers either to the left or to
the right. If you press either the [+] or [-] PAN buttons once only, the
display will show the normal setting corresponding to Pan at the cen-
tre (00). Press the [+] or [-] PAN buttons repeatedly to pan the overall
sound to the left (max: 07) or to the right (max: 07). The cancel the Pan
setting and restore the normal Pan position (centre), press both [+] and
[-] PAN buttons at the same time.
Note: The programmed TRANSPOSE setting will remain memorized until you turn the instrument off. When you
turn gk360 on again, the instrument will set to the normal Transpose setting (00).
Note: The programmed TUNE setting will remain memorized until you turn the instrument off.
When you turn gk360 on again, the instrument will set to the normal Tune setting (00).
Note: The programmed PAN setting will remain memorized until you turn the instrument off. When you turn gk360
on again, the instrument will set to the normal Pan setting (00)
The percussion function allows to program as PAD the Mem-
ory keys. Through the [+] and [-] keys you can turn the PER-
CUSS function ON so that you can play 6 different drum pad
kits in real time.
The BEAT function allows you to set a time signature (number
of beats in a measure) for the Metronome. The factory set-
ting corresponds to 4 beats for every measure. If you press
either the [+] or [-] button, the display will show the factory
setting (for example, “4”).
The Beat function
Press either the [+] or [-] button repeatedly to scroll to the
required Beat number.
The PERCUS function
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for General Music GK360 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of General Music GK360 in the language / languages: English as an attachment in your email.

The manual is 1,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info