503388

General Music CD20 Manual

18
Zoom out
Zoom in
Previous page
1/36
Next page
16
limitation.
4. Only one track at a time can be recorded in RealSong, so
only one track button will flash at a time.
Press the button which corresponds with the track to be
recorded repeatedly until its track name appears on the
display.
5. Select the Sound you want to assign to that track. Only
drumkit sounds can be assigned to the Drum track.
6. Adjust the tempo before starting to record. The new value
will become the initial tempo for the Song.
7. Activate or disactivate the effects; select the effects re-
quired.
8. Set the initial track volume using the buttons in the MIXER
section.
9. The split point cannot be changed, because the recording
is made with no keyboard range limits, one track at a time.
Recording
1. Press [START/STOP] to start recording.
2. During recording you can change Sound, Tempo and Vol-
ume, use the Damper pedal, activate/disactivate and
change the Effects.
3. Use [START/STOP] to stop recording.
4. The led of the recorded track comes on. An asterisk (*)
appears next to the track name:
5. Select another track and continue recording. If you overdub
a track which is already recorded, the new notes are added
to the track. Use the Erase function, described later, to
cancel any notes which have been added in error.
To exit the “record” mode
Press the two [ESC] buttons together.
The Song name
1. If necessary, press [CHORDS] to put the song into the
“record” mode.
2. Press [CLEAR] to call up the edit and erase menu.
3. Press the [NAME] button (on the keypad) to enter the Song
name or edit an existing name.
4. Use the keypad to key in the letters/numbers (each key
has three characters, which appear one after the other in
cycles each time the key is pressed).
5. Press [PAGE>] to move to the next space. Press [PAGE<]
to move back a space.
6. When you have finished, press both [ESC] buttons to exit
the “record” mode and confirm the Song name.
Changes and corrections
SongStyle and RealSong can be modified by re-entering the
record mode and using the functions called up by the [CLEAR]
and [QUANTIZE] buttons.
Editing the Sound and initial volume
1. Adjust the track volumes (using the buttons in the MIXER
section).
2. Press [CHORDS] to return to the “record” mode. The flash-
ing |R appears on the display.
3. Select the track where you want to change the Sound.
4. Select a different sound for that track.
5. Press [START/STOP] to start recording.
6. Immediately after the initial “count in”, stop the recording
using [START/STOP].
7. Press a different track button if you want to edit another
track. Alternatively, press [ESC] to exit the “record” mode.
How to erase parts (CLEAR)
1. Press [CHORDS] to return to the record mode. The flash-
ing |R appears on the display.
2. Press [CLEAR]. The menu of edit and erase operations
appears:
3. Press [CLEAR] to select “Clear”. The CLEAR function ap-
pears on the display:
4. Use [TEMPO-DATA] to select the track you want to can-
cel.
In SongStyle you can choose Chord, Lower, Upper, Com-
mon, Tempo, and Pads tracks. In RealSong you can
choose Drum, Bass, Acc1, Acc2, Lower, Upper, Common,
Tempo (use the ERASE function on the Drum part to can-
cel the pads). “All” erases the whole Song.
5. Press [CLEAR] to confirm the track selection.
6. The question “Sure?” appears on the display. Press
[CLEAR] to confirm, or the two [ESC] buttons to cancel
the erase procedure. Alternatively, press one of the track
buttons to cancel the procedure and return to “record”.
Erasing a note or a percussive instrument (ERASE)
1. Press [CHORDS] to return to the record mode. The flash-
ing |R appears on the display.
2. Press [CLEAR]. The menu of edit and erase operations
appears:
3. Select “Erase” with the [PAGE>] button.
4. Press [CLEAR] to enter the ERASE function:
5. Select the track on which the note is to be erased using
[TEMPO-DATA].
6. Press [START/STOP] to start Song playback.
… 18 …


Need help? Post your question in this forum.

Forumrules
1

Forum

general-music-cd20

Reset search

  • The upper part of the cd2 keyboard isn't sounding and unfortunately the keyboard screen is not functioning again. Please Help Submitted on 5-1-2023 at 08:21

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for General Music CD20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of General Music CD20 in the language / languages: English as an attachment in your email.

The manual is 0,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info