503388

General Music CD20 Manual

15
Zoom out
Zoom in
Previous page
1/36
Next page
13
ENGLISH
Apart from the standard method, Sound and Styles can be
chosen using [PAGE <] and [PAGE>] on the keypad.
Sound selection
1. If the Sound name is not flashing on the display then press
[SOUNDS] to make it do so.
2. If you want to assign the Sound to the Lower part, press
and hold the [LOWER] button.
How to select Sounds and Styles using the [PAGE] buttons
The Touch Keyboard
On electronic keyboards the standard term for drums is
drumkit, and each note of the keyboard is assigned to a dif-
ferent percussive sound. The CD20/30 has 8 drumkits, and
each Style calls up the most suitable drumkit for its Drum
part.
Along with all the traditional percussion sounds, the CD20/30
drumkits also contain “special” sounds, called samples.
The 13 large DRUMS & SAMPLES PADS buttons are called
pads, and play percussive sounds or samples.
The pads play sounds which are in the drumkit of the Drum
instrument part, or sounds from the drumkit assigned as
Sound to the Upper instrument part.
3. Scroll backwards and forwards through the Sound list us-
ing [PAGE<] or [PAGE>].
Style selection
1. If the Style name is not flashing on the display then press
[STYLE/SONG] to make it do so.
2. Scroll backwards and forwards through the Style list us-
ing [PAGE<] or [PAGE>].
The CD20/30 has two sound banks which can be assigned
to the Upper and Lower parts. The sounds contained in the
first bank are printed on the control panel. A list of the sounds
in the second bank can be found in the appendix of this
manual.
The first and second banks contain different versions of the
same sound. For example, if in the first bank sound 00 is
GrandPiano, then sound 00 will be a piano sound in the sec-
ond bank too.
The second sound bank is compatible with General MIDI
standard sounds (see the chapter on “Midi”). The first bank
however, substitutes the “Percussion” family with the “Drums”
family, so that the drumkits can also be played by hand on
the keyboard, assigning them to the Upper and Lower parts,
as if they were normal Sounds.
Selecting a sound bank
1. Make sure that the Sound name is flashing on the display.
If it is not, then press [SOUNDS] to make it do so.
2. Press the two [BANK 1/2] buttons together on the keypad.
3. The display will show the name of the bank you have se-
lected (“Sound Bank 1” or “Sound Bank 2”):
4. After you have selected the bank, select the sound re-
quired. The sound bank selected will remain active until
the other bank is chosen (followed by a sound selection).
The two sound banks
… 15 …


Need help? Post your question in this forum.

Forumrules
1

Forum

general-music-cd20

Reset search

  • The upper part of the cd2 keyboard isn't sounding and unfortunately the keyboard screen is not functioning again. Please Help Submitted on 5-1-2023 at 08:21

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for General Music CD20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of General Music CD20 in the language / languages: English as an attachment in your email.

The manual is 0,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info