619319

General Mobile DST-350 Manual

6
Zoom out
Zoom in
Previous page
1/32
Next page
6
After the battery is charged full, the icon is full of bars. Slight heat during charging is normal.
Warning: When a travel charger and its accessories are used to charge the battery, please firstly
check if they are original or recognized by the original manufacturer. The use of other accessories
may damage your mobile phone and cause risks! Always use them indoor and in dry places.
Notices on using the battery
The performance of the battery is affected by many factors, including radio barrier network
settings, signal strength, work temperature, chosen and used functions or settings as well as phone
accessories, tone, data or other applications.
For optimal performances, please follow the rules below:
New battery or the battery having been idle for long need charging for long. The standard
voltage scope for the battery is 3.6V-4.2V.
During charging, keep the battery at room temperature or similar temperature.
With time passing by, the battery will gradually be worn and thus need longer time to charge.
This is normal. However, after normal charging, if call duration decreases but charging time
increases, you need to buy another battery from the original manufacturer or authorized by
the original manufacturer. The battery of interior quality can damage your mobile phone and
cause danger!
If the phone is overused at low battery when charging, there might need a longer time for the
charge indicator to be shown on the screen.
Note: Please dispose the battery according to the local regulations. Try to recycle the battery as
possible. Do not treat the waste battery as common waste.
Warning: Do not throw the battery into fire so as to prevent fire. The broken battery may cause
explosion.
Warning
Charging the mobile phone by improper means can cause to
explosion. Always refer to the related regulations for the disposal of
the battery.
PIN Code
PIN1 Code:It is the personal identification number used to enter SIM1 and able to prevent
others using SIM1 without permission. If the mobile phone has activated the PIN1 code protection,
when the mobile phone is switched on, the screen will display “Input SIM1 PIN”. In the process of
inputting PIN1 code, the screen will use “*” to represent the input content. While obtaining SIM1,
you can obtain its PIN1 code.
PIN2 Code: It is the personal identification number used to enter SIM2 and able to prevent
others using SIM2 without permission. If the mobile phone has activated the PIN2 code protection,
when the mobile phone is switched on, the screen will display “Input SIM2 PIN”. In the process of
inputting PIN2 code, the screen will use “*” to represent the input content. While obtaining SIM2,
you can obtain its PIN2 code.
PUK Code and PUK2 Code(8-digit)
To change the locked PIN1 code, you need to use PUK1 (Personal Unblocking Key) code. To
change the locked PIN2 code, you need to use PUK2 code. If these two codes are not provided
together with the SIM cards, ask the local service provider for them.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for General Mobile DST-350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of General Mobile DST-350 in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info