502948

General Electric TruVision DVR 10 Manual

77
Zoom out
Zoom in
Previous page
1/112
Next page
Chapter 5: Advanced setup
TruVision DVR 10 User Manual 73
Option Description
Port Specifies the network access port number. This value must be greater than
2000.
Mask Specifies the subnet mask. Default value is 255.255.255.0.
Gateway Specifies the gateway IP address. The gateway IP is used to communicate in
different network segments.
Http Port Specifies the port used for the Internet Explorer (IE) browser. The default value is
80. This value can be modified.
Advanced settings Specifies the advanced IP settings. See “Advanced IP settings” below for more
information.
Advanced IP settings
Table 20 below describes the advanced IP settings.
Table 20: Advanced IP settings
Option Description
Mac Specifies the physical address of the device. This value can not be
overwritten.
NIC type Specifies the NIC type. Default is 10M/100M Auto. Other options include:
10M Half-Dup, 10M Full-Dup, 100M Half-Dup and 100M Full-Dup.
IP server address Use this option if the TVR 10
is utilizing the PPPoE function, and retrieves
one dynamic IP address. If you define the DNS IP with one fixed Internet
IP address, the TVR 10 sends information such as TRV10 name, serial
number, and current IP address to that fixed IP address. The fixed IP
address is referred to as the DNS IP. The DNS server with that fixed
Internet IP address can receive the TVR 10 information and be used to
resolve the TRVR10 dynamic IP address. This IP server is a unique
software and does not fall into the normal domain name server. You
can use the SDK provided to develop this DNS software.
Multicast IP Specifies a D-class IP address between 224.0.0.0 to 239.255.255.255.
You do not need to specify this option if you are not using the multicast
function. Some routers prohibit the use of multicast function in case of
a network storm.
Remote Host IP and Port If an alarm and exception occur, the TVR 10 sends information to the
host IP you specify in this option. The site that has this IP can remotely
receive the alarm and exception information from the TVR 10.
… 77 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for General Electric TruVision DVR 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of General Electric TruVision DVR 10 in the language / languages: English as an attachment in your email.

The manual is 2,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info