502911
26
Zoom out
Zoom in
Previous page
1/280
Next page
26
Installation Instructions
The rollers have 3 purposes:
Rollers adjust so the door closes easily when opened
about halfway. [Raise the front about 5/8 (16 mm)
from the floor.]
Rollers adjust so the refrigerator is firmly positioned
on the floor and does not wobble.
Rollers allow you to move the refrigerator away from
the wall for cleaning.
Final leveling adjustments should be made after
the refrigerator has been installed.
To adjust the rollers on 25, 27 and 29 models:
Turn the roller
adjusting screws
clockwise to raise
the refrigerator,
counterclockwise to
lower it. Use a 3/8
hex socket or wrench,
or an adjustable
wrench.
To adjust the rollers on 21 and 23 models:
Remove the base grille by opening the doors, removing
the screws at each end, and pulling it straight out.
Turn the front roller
adjusting screws
clockwise to raise
the refrigerator,
counterclockwise to
lower it. Use a 3/8
hex socket or wrench,
or an adjustable
wrench.
These models also have rear adjustable rollers so you
can align the refrigerator with your kitchen cabinets.
Use a long-handled 5/16 socket wrench to turn the
screws for the rear rollers–clockwise to raise the
refrigerator, counterclockwise to lower it.
Replace the base grille.
ROLLERS
Roller adjusting screw
Roller adjusting screws
After leveling, make sure that the refrigerator door is 1/16
higher than the freezer door.
To align the doors, adjust the refrigerator door.
Using a 7/16 socket wrench, turn the door adjusting
screw to the right to raise the door, to the left to lower
it. (A nylon plug, imbedded in the threads of the pin,
prevents the pin from turning unless a wrench is used.)
After one or two turns of the wrench, open and close
the refrigerator door and check the alignment at
the top of the doors.
To remove the base grille,
open the doors, remove
the screw at each end of
the base grille and then
pull the grille straight out.
7/16 Socket Wrench
Raise
DOOR ALIGNMENT
Refrigerator door
needs to be raised.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for General Electric Side by Side 23 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of General Electric Side by Side 23 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 7,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of General Electric Side by Side 23

General Electric Side by Side 23 User Manual - Dutch - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info