502911
17
Zoom out
Zoom in
Previous page
1/280
Next page
Precise Fill (on some models)
This water dispenser is equipped with a feature called
precise fill.” This feature allows you to choose a precise
amount of water (cups or ounces) that you would like
dispensed. Pints and Liters are also available for LCD
models.
LCD Models
Access By: Home > Options > Dispenser Options >
Precise Fill > Set Amount
Activate By: Using the arrow buttons to select
the desired amount. Press MORE UNITS to select
between CUPS, OUNCES, PINTS or LITERS.
Non-LCD Models
Press the PRECISE FILL CUPS/OZ pad. The WATER
pad will light and the CRUSHED and CUBED ice
pads will turn off. The last unit used will be
displayed.
Press the PRECISE FILL pad again to toggle
between cups and ounces.
If you selected OUNCES, press the or pad to
select the number of ounces you would like to have
dispensed between 2–99 ounces. The default is
8 ounces.
If you selected CUPS, press the or pad to select
the amount you would like to have dispensed. They are
displayed as 0.25, 0.33, 0.5, 0.66 and 0.75, with the
highest amount being 9.75 cups. The default is 1 cup.
For liters, the amounts are displayed as 0.05 to 2.25
in increments of 0.05.
Press the cup against the cradle and water will
begin dispensing. It will automatically stop when
the amount set has been dispensed. The display
will show the amount of water dispensed, beep,
then reset after 5 seconds.
NOTE: Do not leave the dispenser unattended when
water is being dispensed.
If you would like to stop dispensing water
before the specified amount has been dispensed,
just remove the cup from the cradle. The display
will show the amount that has been dispensed
for 5 seconds. If the cup switch is pressed again
within that time, the dispenser will continue up
to the set amount. If not, the display will return
to the set amount.
>
>
>
>
Cleaning the Outside
The dispenser drip area, beneath the grille, should be
wiped dry. Water left in this area may leave deposits.
Remove the deposits by adding undiluted vinegar to
the well. Soak until the deposits disappear or become
loose enough to rinse away.
The dispenser cradle. Before cleaning, lock the
dispenser by pressing and holding the LOCK or LOCK
CONTROLS pad for 3 seconds. Clean with warm water
and baking soda solution—about a tablespoon (15 ml)
of baking soda to a quart (1 liter) of water. Rinse
thoroughly and wipe dry.
The door handles and trim. Clean with a cloth
dampened with soapy water. Dry with a soft cloth.
The stainless steel panels and door handles
(on some models) can be cleaned with a commercially
available stainless steel cleaner. A spray-on stainless
steel cleaner works best.
Do not use appliance wax or polish on the stainless
steel.
Keep the outside clean. Wipe with a clean cloth lightly
dampened with kitchen appliance wax or mild liquid
dish detergent. Dry and polish with a clean, soft cloth.
Do not wipe the refrigerator with a soiled dish
cloth or wet towel. These may leave a residue
that can erode the paint. Do not use scouring pads,
powdered cleaners, bleach or cleaners containing
bleach because these products can scratch and
weaken the paint finish.
Dispenser drip area.
Care and cleaning of the refrigerator.
Important Facts About Your Dispenser
Do not add ice from trays or bags to the storage
drawer. It may not crush or dispense well.
Avoid overfilling glass with ice and use of narrow
glasses. Backed-up ice can jam the chute or
cause the door in the chute to freeze shut.
If ice is blocking the chute, poke it through
with a wooden spoon.
Beverages and foods should not be quick-chilled
in the ice storage drawer. Cans, bottles or food
packages in the storage drawer may cause
the icemaker or auger to jam.
To keep dispensed ice from missing the glass,
put the glass close to, but not touching,
the dispenser opening.
Some crushed ice may be dispensed even
though you selected CUBED. This happens
occasionally when a few cubes accidentally
get directed to the crusher.
After crushed ice is dispensed, some water may
drip from the chute.
Sometimes a small mound of snow will form on
the door in the ice chute. This condition is normal
and usually occurs when you have dispensed
crushed ice repeatedly. The snow will eventually
evaporate.
17
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for General Electric Side by Side 23 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of General Electric Side by Side 23 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 7,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of General Electric Side by Side 23

General Electric Side by Side 23 User Manual - Dutch - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info