503003
13
Zoom out
Zoom in
Previous page
1/88
Next page
Consumer Support
Troubleshooting TipsOperating InstructionsSafety Instructions
About changing the
power level.
ge.com
13
Variable power levels add flexibility to microwave
cooking. The power levels on the microwave oven
can be compared to the surface units on a range.
High (power level 10) or full power is the fastest
way to cook and gives you 100% power. Each power
level gives you microwave energy a certain percent
of the time. Power level 7 is microwave energy 70%
of the time. Power level 3 is energy 30% of the time.
A high setting (10) will cook faster but food may
need more frequent stirring, rotating or turning
over. Most cooking will be done on High (power
level 10). A lower setting will cook more evenly and
need less stirring or rotating of the food.
Some foods may have better flavor, texture or
appearance if one of the lower settings is used. Use
a lower power level when cooking foods that have a
tendency to boil over, such as scalloped potatoes.
Rest periods (when the microwave energy cycles off)
give time for the food to “equalize” or transfer heat
to the inside of the food. An example of this is
shown with power level 3—the defrost cycle. If
microwave energy did not cycle off, the outside of
the food would cook before the inside was defrosted.
Here are some examples of uses for various
power levels:
Power Level Best Uses
High 10 Fish, bacon, vegetables, boiling
liquids.
Med-High 7 Gentle cooking of meat and poultry;
baking casseroles and reheating.
Medium 5 Slow cooking and tenderizing such
as stews and less tender cuts of meat.
Low 2 or 3 Defrosting without cooking;
simmering; delicate sauces.
Warm 1 Keeping food warm without
overcooking; softening butter.
How to Change the
Power Level
The power level may
be entered or changed
immediately after
entering the feature
time for TIME COOK,
TIME DEFROST, EXPRESS
COOK or ADD 30 SEC.
The power level may
also be changed during
time countdown.
Press TIME COOK or
select Time Defrost.
Enter cooking or
defrosting time.
Press POWER LEVEL.
Select desired power
level 1–10.
Press START.
5
4
3
2
1
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for General Electric JVM1871 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of General Electric JVM1871 in the language / languages: English as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info