502987

General Electric JRP28 Manual

10
Zoom out
Zoom in
Previous page
1/24
Next page
Special features of your oven control.
Your new touch pad control has additional features that you may choose to use. The following are the features
and how you may activate them.
The special feature modes can only be activated while the display is showing the time of day. They remain
in the control’s memory until the steps are repeated.
When the display shows your choice, touch the START pad. The special features will remain in memory after
a power failure, except for the Sabbath feature, which will have to be reset.
12 Hour Shut-Off
With this feature, should you forget and leave the
oven on, the control will automatically turn off the
oven after 12 hours during baking functions or
after 3 hours during a broil function.
If you wish to turn OFF this feature,
follow the steps below.
Touch the BAKE and BROIL HI/LO
pads at the same time for 3 seconds
until the display shows SF.
Touch the DELAY START pad until
no shdn (no shut-off) appears in the
display.
Touch the START pad to lock in the
no shdn (no shut-off ) feature and
leave the control set in this special
features mode.
NOTE: This feature is not available for the
lower oven.
Fahrenheit or Celsius Temperature Selection
Your oven control is set to use the Fahrenheit
temperature selections but you may change this
to use the Celsius selections.
Touch the BAKE and BROIL HI/LO
pads at the same time for 3 seconds
until the display shows SF.
Touch the BROIL HI/LO and COOKING
TIME pads at the same time for 2
seconds. The display will show F
(Fahrenheit).
Touch the BROIL HI/LO and
COOKING TIME pads again at the
same time for 2 seconds. The display
will show C (Celsius).
Touch the START pad.
NOTE: This feature is not available for the
lower oven.
Control Lockout (on some models)
Your control will allow you to lock down the touch
pads so they cannot be activated when touched.
Touch the BAKE and BROIL HI/LO
pads at the same time for 3 seconds
until the display shows SF.
Touch the SELF CLEAN pad. The
display will show LOC OFF.
Touch the SELF CLEAN pad again.
The display will show LOC ON.
Touch the START pad to activate
the control lockout feature and
leave the control set in this special
features mode.
When this feature is on and the touch
pads are touched, the control will beep
and the display will show LOC.
To unlock the control, repeat steps 1 and
2. Touch the START pad when the display
shows LOC OFF.
NOTE:
■ The control lockout mode will not affect the
TIMER/CLOCK and OVEN LIGHT ON/OFF
touch pads.
■ This feature is not available for the lower oven.
10
Safety InstructionsOperating InstructionsCare and CleaningTroubleshooting TipsConsumer Support
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for General Electric JRP28 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of General Electric JRP28 in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info