502986

General Electric JRP20 Manual

9
Zoom out
Zoom in
Previous page
1/24
Next page
Safety Instructions
Operating Instructions
Care and Cleaning
Troubleshooting Tips Consumer Support
Using the timed baking and roasting features.
(These features are not available for the lower oven.) (on some models) GEAppliances.com
NOTE: Foods that spoil easily—such as milk, eggs, fish, stuffings, poultry and pork—should not be allowed to sit for
more than 1 hour before or after cooking. Room temperature promotes the growth of harmful bacteria. Be sure that
the oven light is off because heat from the bulb will speed harmful bacteria growth.
How to Set an Immediate Start and Automatic Stop
The oven will turn on immediately and cook for a
selected length of time. At the end of the cooking
time the oven will turn off automatically.
Make sure the clock shows the correct
time of day.
Touch the BAKE pad.
Using the + or – pad, enter the
desired temperature.
Touch the COOKING TIME pad.
NOTE: If your recipe requires preheating, you may
need to add additional time to the length of the
cooking time.
Using the + or – pad, enter the
desired baking time. The maximum
time you can enter in minutes is 59.
Cooking times more than 59
minutes should be changed
to hours and minutes. For example,
enter 90 minutes as 1 hour, 30
minutes.
The oven temperature and the cooking
time that you entered will be displayed.
Touch the START pad.
The display shows the oven temperature
that you set and the cooking time
countdown. The display starts changing
once the temperature reaches 100°F.
The oven will continue to cook for the
programmed amount of time, then shut
off automatically, unless the Cook and
Hold feature was set. See the Special
features of your oven control section.
Touch the CLEAR/OFF pad to clear the
display.
How to Set a Delayed Start and Automatic Stop
You can set the oven control to delay-start the
oven, cook for a specific length of time and then
turn off automatically.
Make sure the clock shows the correct
time of day.
Touch the BAKE pad.
Using the + or – pad, enter the
desired temperature.
Touch the COOKING TIME pad.
NOTE: If your recipe requires preheating, you may
need to add additional time to the length of the
cooking time.
Using the + or – pad, enter the
desired baking time. The maximum
time you can enter in minutes is 59.
Cooking times more than 59
minutes should be changed to hours
and minutes. For example, enter 90
minutes as 1 hour, 30 minutes.
The oven temperature and the cooking
time that you entered will be displayed.
Touch the DELAY START pad.
Using the + or – pad, enter the time
of day you want the oven to turn on
and start cooking.
Touch the START pad.
NOTE: An attention tone will sound if you are
using timed baking and do not touch the START
pad after entering the baking temperature.
If you would like to check the times you
have set, touch the DELAY START pad to
check the start time you have set, or
touch the COOKING TIME pad to check
the length of cooking time you have set.
When the oven turns on at the time of
day you have set, the display will show the
changing temperature (starting at 100°F)
and the cooking time countdown.
The oven will continue to cook for the
programmed amount of time, then shut
off automatically, unless the Cook and
Hold feature was set. See the Special
features of your oven control section.
At the end of timed baking, the oven
will turn off. The end of cycle tone will
sound.
Touch the CLEAR/OFF pad to clear the
display.
9
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for General Electric JRP20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of General Electric JRP20 in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info