646564
11
Zoom out
Zoom in
Previous page
1/36
Next page
About Appliance Communication.
GEAppliances.com
11
This dryer can communicate with a compatible
washer (one whose Owner’s Manual contains a
CleanSpeak
description) via WiFi Connect.
At the end of the wash cycle, the washer sends a
signal to the dryer to indicated a preferred dry cycle.
When the dryer becomes idle (“End” display times out
- or- the door is opened) “CYCLE” will scroll across its
cycle time display, its current cycle knob setting LED
will be lit, and (if different) a second recommended
cycle LED will blink. If “CYCLE” times out, pressing
Power will refresh it and the LEDs. If the dryer cycle
knob is turned , the solid LED will move accordingly.
Pressing the dryer Start will initiate the cycle knob
setting (solid LED) and turn off the recommended
(blinking LED) if a different cycle is started.
WiFi Connect (for customers in the United States)
Your dryer is GE WiFi Connect Enabled. A WiFi
communciation card is built into the product
allowing it to communicate with your smartphone
for remote monitoring, control and notifications.
Please visit www.GEAppliances.com/connect to
learn more about connected appliance features,
to learn what connected appliance app’s will work
with your smartphone.
WiFi Connectivity: For assistance with the appliance
or the ConnectPlus network connectivity, please
call 800-GE-CARES.
CleanSpeak
TM
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.
Labelling: Changes or modifications to this unit not expressly approved by the manufacturer could void the
user’s authority to operate the equipment.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for General Electric GTD86 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of General Electric GTD86 in the language / languages: English, Spanish as an attachment in your email.

The manual is 2,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info