646569

General Electric GTD81 Manual

5
Zoom out
Zoom in
Previous page
1/36
Next page
5
GEAppliances.com
Power
Press to “wake up” the display. If the display is active, press to put the dryer into idle mode.
NOTE: Pressing Power does not disconnect the appliance from the power supply.
Start and Pause
Press Start to begin the cycle. NOTE: The door must be closed for the dryer to start the cycle. Pressing Start again will pause
the cycle, the Start light will blink and “PAUSE” will scroll across the LCD.
To continue the cycle, press Start again.
Display and Status Lights
The display shows the approximate time remaining until the end of the cycle.
In addition, this display will, “scroll” the dryer status:
• PAUSE The message “PAUSE” will scroll across the display when the dryer’s cycle is paused. The cycle may be
re-started by pressing the Start button.
• door The message “door” will be displayed when the door is opened during the dryer’s cycle.
• CyCLE The message “CyCLE” will be displayed when the clothes are dry and the dryer is recommending a
preferred cycle for the next load (see CleanSpeak
™
section).
• dELAY The message “dELAY” will be displayed when the Delayed Dry is initiated. It will be replaced with the
estimated time when cycle starts.
Cycle status lights
Shows whether the dryer is in the DRYING, DAMP, or COOL DOWN cycle.
Feature status lights indicate:
Delay Dry
A delay dry time is set.
Locked Controls
The dryer controls are locked - will blink once if you press any button or turn the cycle knob.
Clean Lint Filter Light will stay on for 15 seconds after the cycle stops.
Drying Cycles-Sensor cycles automatically determine fabric dryness.
Timed cycles run for the selected time.
Speed Dry For small loads that are needed in a hurry, such as sport or school uniforms. Can also be used if the
previous cycle left some items damp, such as collars or waistbands. NOTE: On some models, the time
remaining in the cycle will show counting down in the display.
Casuals/ For wrinkle-free, permanent press, delicate items and knits.
Easy Care
Delicates For delicate items, special-care fabrics and knits.
Jeans For jeans.
Cottons For cottons and most linens. Note: ENERGY STAR
®
models are tested on Cottons with default settings.
Mixed Loads
For loads consisting of cottons and poly-blends.
Towels/Sheets For most towels and linens.
Bulky Items For large coats, bed spreads, mattress covers, sleeping bags and similar large/bulky items such as
blankets, comforters, jackets, and small rugs.
Air Fluff For freshening or fluffing up already dry clothing, fabric, linens and pillows.
Provides 10 minutes of no-heat tumbling.
Dewrinkle Tumble for a short time with heat shown on Temp continues to tumble with no heat periodically
sounding signal until door is opened.
Timed Dry
Set the cycle selector at the desired drying time.
A
B
C
D
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for General Electric GTD81 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of General Electric GTD81 in the language / languages: English, Spanish as an attachment in your email.

The manual is 2,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info