646573

General Electric GFD45 Manual

5
Zoom out
Zoom in
Previous page
1/44
Next page
Power
Press to “wake up” the display. If the display is active, press to turn the dryer off.
NOTE: Pressing Power does not disconnect the appliance from the power supply.
1
Control settings.
GEAppliances.com
Mixed Loads
For loads consisting of cottons and poly-blends.
Cottons
For cottons and most linens.
Delicates
For lingerie and special-care fabrics.
Bulky/Bedding or
Bulky Items
For large coats, bed spreads, mattress covers, sleeping bags, blankets, comforters, jackets, small rugs,
and similar large and bulky items.
Perm Press/Casuals
Clothing worn for active sports exercise and some casual wear. Fabrics include new technology
finishes and stretch fibers such as Spandex. Also for clothing labeled Easy Care or Perma Press: For
wrinkle-free and permanent press items.
Quick Dry
For small loads that are needed in a hurry, such as sports or school uniforms. Can also be used if the
previous cycle left some items damp, such as collars or waistbands.
Towels/Sheets
Use for towels OR sheets. It is not recommended to mix towels and sheets in the same load.
Steam Dewrinkle
Full Loads
(on some models)
Provides 20 minutes of steam drying to assist with dewrinkling clothes.
Ideal for loads left in dryer
for an extended time.
Dewrinkle
Full Loads
(on some models)
Provides 20 minutes of drying to assist with dewrinkling items that are dry or slightly damp. This
cycle is not recommended for delicate fabrics.
Warm Up
Provides 10 minutes of warming time to warm up clothes.
Air Fluff/No Heat
Provides 10 minutes of tumbling time without heat.
Time Dry
Use to set your own dry time. Time Dry is also recommended for small loads. To use:
1. Turn dry cycle dial to Time Dry.
2. Increase the drying time by pressing the Add Time button.
Note: This button only increases the time. When max time is reached, pressing the button again
will reset the counter to the lowest setting.
3. Select the Temp.
4. Close the door.
5. Press Start/Pause.
Dry Cycles
The dry cycle controls the length and tumble speed of the drying process. The chart below will help you match the dry
setting with the loads.
5
Quick Start
1
Press the
Power
button.
2
Select a dry cycle. (Defaults are set
for each cycle. These default
settings can be changed. See
Control settings for more
information.)
3
Press the Start/Pause button.
If the screen is dark, a press
of the Power button will
“wake up” the display.
Add Time
Press to add time to the Steam Dewrinkle,
Dewrinkle, Warm Up, Air Fluff or Time Dry
cycles in 10 minute increments.
3
2
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for General Electric GFD45 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of General Electric GFD45 in the language / languages: English, Spanish as an attachment in your email.

The manual is 3,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info