505292

General Electric GCG1540 Manual

11
Zoom out
Zoom in
Previous page
1/20
Next page
11
Customer ServiceTroubleshooting Tips
Operating InstructionsSafety Instructions
Installation Instructions
Electrical ground is required on this compactor.
DO NOT ground to a gas pipe.
DO NOT change the power supply cord plug. If it
does not fit the outlet, have a proper outlet installed
by a qualified electrician.
DO NOT have a fuse in the neutral or grounding
circuit. A fuse in the neutral or grounding circuit
could result in an electrical shock.
DO NOT use an extension cord with this compactor.
Check with a qualified electrician if you are not
sure the compactor is properly grounded.
Failure to follow these instructions could result in
death or serious injury.
WARNING
Electrical Shock
Hazard
If codes permit and a separate grounding wire is used, it is recommended that a qualified
electrician determine that the grounding path is adequate.
IMPORTANT: Observe all governing codes and ordinances.
A 120-volt, 60-Hz, AC-only, 15- or 20-ampere, fused electrical supply is required. Time-delay fuse
or circuit breaker is recommended. It is recommended that a separate circuit serving only this
appliance be provided.
Recommended Grounding Method
For your personal safety, this appliance must be
grounded. This appliance is equipped with a power
supply cord having a 3-prong grounding plug. To
minimize possible shock hazard, the cord must be
plugged into a mating, 3-prong, grounding-type,
wall receptacle, grounded in accordance with the
national Electrical Code ANSI/NFPA70—latest
edition* and all local codes and ordinances. If a
mating wall receptacle is not available, it is the
personal responsibility and obligation of the
customer to have a properly grounded, 3-prong,
wall receptacle installed by a qualified electrician.
Copies of the standards listed may be
obtained from:
*National Fire Protection Association
Batterymarch Park,
Quincy, Massachusetts 02269
3-prong grounding-type wall receptacle
3-prong grounding plug
Grounding
plug
Power supply cord
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for General Electric GCG1540 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of General Electric GCG1540 in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info