505291

General Electric GCG1530 Manual

10
Zoom out
Zoom in
Previous page
1/20
Next page
Installation Instructions.
Before you start…
Proper installation
is your responsibility. Make
sure you have everything necessary for correct
installation. It is the personal responsibility and
obligation of the customer to contact a qualified
installer to assure that electrical installation meets
national and all local codes and ordinances.
Grounded electrical outlet is required.
Check the location
where your compactor will be
installed. The cabinet opening should be square.
You should be able to fully open the compactor
drawer. Six inches (15.2cm) of clearance is
needed on the right side of compactor drawer to
be able to remove the compactor bag. Allow 23
inches (58.4 cm) in front of the compactor to
remove drawer.
Fire Hazard
Do not let any item fall or collect behind
the compactor.
Failure to follow this instruction could
result in a fire.
WARNING
Cutout dimensions
Product dimensions—
The overall
look of your compactor may vary.
Clearance dimensions
Tools and Materials Needed for Installation
■ Level
■ Phillips screwdriver
■ Flat-blade screwdriver
■ Pliers
■ Utility knife
■ Scissors
■ Measuring tape
■ 5/16″ box-end wrench
■ Gloves
Parts Supplied for Undercounter Installation—
Remove parts from literature package.
■ 2 mounting clips ■ 2 mounting screws
#8 - 18 x 1/2″
Grounded electrical
outlet must be 3″
(7.6 cm) min. from
either side wall.
15-1/4″ min.
(38.4 cm)
18″ min.
(45.7 cm)
24″ min.
(61 cm)
34-1/4″ min.
(87 cm)
34-1/8″ min.
(86.7 cm)
24″ min.
(61 cm)
23″ (58.4 cm)
Clearance in front
of the compactor is
needed to fully open
or remove the
compactor door.
6″ (15.2 cm)
Clearance to
the nearest
vertical wall
on the right
side of the
compactor is
needed to
remove bag.
14-15/16″ min.
(38 cm)
10
Customer Service Troubleshooting Tips
Operating Instructions
Safety InstructionsInstallation InstructionsCustomer Service Troubleshooting Tips Installation Instructions Safety Instructions
Operating Instructions
Customer Service Troubleshooting Tips Installation Instructions Safety Instructions
Operating Instructions
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for General Electric GCG1530 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of General Electric GCG1530 in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info