Manual General Electric DDE7608M (page 11 of 16) (English)

646520

Zoom out

Zoom in

1/16

PROBLEM

POSSIBLE CAUSE AND REMEDY

SHMNKAGE,

●

Relaxation shrinkage can

occur in knit fabrics that have been improperly stretched

KNITS and

elongatd by the manufacturer. When this occurs, garment maybe pressed back into

shape after each wash and dry cycle.

●

Progr=sive

or delayed shrinkage

is caused when starch or sizing (in some fabrics) is

gradually removed by laundering. Maybe

noticd

in older garments that have been

laundeti many times without previous-e.

for Rel~tion

S-

tie.

Shrinkage

camed

by overheating

occurs in certain knit fabrics that have been

heat-

shaped. When washing, drying or ironing temperatures exceed the temperatures used to

shape set, shrinkage may occur. This cannot be corrected, but it can be prevented by

washing in cold or warm water; drying on low heat.

WWNKLINGIN

●

Leaving clothes in dryer after tumbling stops. Remove clothes promptly and hang

PERMANENT PRESS

them immediately.

AND “NO-IRON”

ITEMS

●

Too many items in dryer. Dry only one washer load at a time. Do not combine loads.

●

few items in dryer. If drying only one article, add two or more similar articles, even

if dry, to insure proper tumbling.

. Improper loads. Avoid laundering heavy Permanent Press items, such as work clothes,

with lighter Permanent Press items, such as shirts or blouses. Do not wash or dry

Permanent Press with regular laundry.

Too many clothes in washer. Items must have room to move freely. Permanent Press

loads should always be smaller than regular loads..

.no

more than medium loads.

●

Use of incorrect wash and dry cycles. Use Permanent Press Wash Cycle which provides

a cool-down rinse to minimize

wrinUing.

Also, use Permanent Press Dry Cycle.

●

Incorrect water level. Use large water level for medium load;

medium level

half full

for small load.

●

Washing

repeatiy

in too hot water. Wash in cool or

water with plenty of detergent.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of General Electric DDE7608M in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

General Electric DDE7608M Manual

Product: