646566
87
Zoom out
Zoom in
Previous page
1/108
Next page
CÓMO CONECTAR LA SECADORA
USANDO UNA CONEXIÓN DE 4 CABLES
(DEBE UTILIZARSE EN INSTALACIONES
DE CASAS RODANTES)
NOTA:
Desde el 1 de enero de 1996, el Código Eléctrico
Nacional exige que las nuevas construcciones utilicen
una conexión de 4 cables a una secadora eléctrica.
También debe usarse un cable de 4 alambres cuando
los códigos locales no permiten una conexión a tierra
a través de cable neutral.
NO debe usarse una conexión de tres cables en
una construcción nueva.
Instrucciones de instalación
REQUERIMIENTOS ELÉCTRICOS
PARA SECADORAS ELÉCTRICAS
Esta secadora debe conectarse a un circuito
derivado individual, con la protección de un
disyuntor o fusible de tiempo retardado. Se
requiere un circuito de tres o cuatro cables, fase
única, 120/240V ó 120/208V, 60Hz y 30 amperios.
Si el suministro eléctrico no cumple con dichas
especificaciones, entonces llame a un electricista
matriculado.
NOTA: Para los consumidores canadienses con
modelos PCVH480 y PCVH485, no se requiere
la instalación del cable. Tenga a bien pasar a la
sección siguiente, Salida al exterior de la secadora.
INSTRUCCIONES DE CONEXIÓN A TIERRA
Esta secadora debe conectarse a un sistema de cableado
permanente con conexión a tierra o debe utilizarse
un conductor de conexión a tierra del equipamiento
con los conductores de circuito y conectarse
a la terminal de conexión a tierra del artefacto.
CÓMO CONECTAR LA SECADORA
USANDO UNA CONEXIÓN DE 4 CABLES
(DEBE UTILIZARSE EN INSTALACIONES
DE CASAS RODANTES) (cont.)
ADVERTENCIA:
NUNCA OLVIDE DE VOLVER A COLOCAR
LA TAPA DEL BLOQUE TERMINAL.
1. Desactive el disyuntor (30 amperios)
o quite el fusible del circuito de la secadora
de la caja eléctrica.
2.
Verifique que el cable de la secadora esté
desenchufado del tomacorriente.
3.
Quite la tapa del cable de energía ubicada en
la parte trasera superior.
4.
Quite el tornillo verde con conexión a tierra
y sujete la cinta a tierra a la terminal central
junto a la línea neutral (blanca) descripta abajo.
Conserve el tornillo verde con conexión a tierra
para el Paso 7.
5.
Pase el cable de energía a través del soporte.
6.
Conecte el cable de energía de la siguiente
manera:
A. Conecte los dos cables vivos a los tornillos
externos del bloque terminal (marcado
L1 y L2).
B. Conecte el cable neutral (blanco) al centro
del bloque terminal (marcado N).
7.
Conecte el cable a tierra del cable de energía
con el tornillo verde de conexión a tierra (orificio
sobre el soporte de alivio de tensión). Ajuste
por completo todos los tornillos (3) del bloque
terminal.
8.
Vuelva a instalar la tapa.
Cable verde
del cable de
energía
Cinta de
conexión a tierra
Soporte
87
87


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for General Electric DCVH485EK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of General Electric DCVH485EK in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info