502924

General Electric AEQ12 Manual

44
Zoom out
Zoom in
Previous page
1/48
Next page
Instrucciones de instalación
5
A
B
2 Soportes de cierre de la estructura
PREPARE LA VENTANA
Corte el sello de la banda de la ventana a
la longitud apropiada. Despegue la parte posterior
y pegue el sello a la parte inferior de la banda de la
ventana.
4
3 Tornillos
C
44
6
INSTALE UN SOPORTE DE CIERRE Y LA
JUNTA DE ESPUMA SUPERIOR
DE LA VENTANA
Corte la junta de espuma
superior de la ventana al ancho de la ventana.
Rellene la espuma entre
el vidrio y la ventana
para evitar que aire e
insectos
se introduzcan en la
habitación.
NOTA: Si la junta provista no es adecuada para su
ventana, obtenga el material apropiado localmente
para realizar una adecuada instalación de sellado.
A
PRECAUCIÓN:
En ventanas construidas de
vinil o de similar construcción,
conecte el soporte para
bloqueo de ventana a el
marco de la ventana con uno
tornillo para prevenir daño a
la ventana y vidro quebrado.
B
C
Madera
Vinilo
INSTALE EL ACONDICIONADOR DE
AIRE EN LA VENTANA
Coloque el acondicionador de aire en el umbral
con el riel de montaje inferior contra su extremo
posterior. Céntrelo y cierre la ventana
firmemente
detrás del riel de montaje superior.
Debe estar nivelado o ligeramente inclinado
hacia el exterior. Use un nivel; una inclinación de
1/3 de burbuja será la correcta hacia el exterior.
Extienda los paneles de acordeón izquierdo y
derecho hacia las bandas de la ventana vertical y
pegue 3 tornillos a través de los agujeros en los
paneles superiores, según corresponda.
Instale los soportes de cierre de la estructura
entre el panel inferior del acordeón y el alféizar
de la ventana. Adjunte con 2 tornillos.
NOTA: Para evitar una rajadura del alféizar de
la ventana, coloque los agujeros piloto antes de
colocar los tornillos.
… 44 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for General Electric AEQ12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of General Electric AEQ12 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info