Manual General Electric AEM12 (page 10 of 48) (English, French, Spanish)

502925

Zoom out

Zoom in

1/48

Installation Instructions

2 Frame locking brackets

PREPARE THE WINDOW

Cut the window sash seal to the proper

length. Peel off the backing and attach the

seal to the underside of the window sash.

INSTALL SUPPORT BRACKET AND

FOAM TOP WINDOW GASKET

Cut the foam top window gasket to the window

width.

Stuff the foam

between the glass

and the window

to prevent air and

insects from getting

into the room.

NOTE: If the gasket supplied does not fit your

window, obtain appropriate material locally to

provide a proper installation seal.

CAUTION:

To prevent broken glass or

damage to windows, on

vinyl or other similarly

constructed windows,

attach the window locking

bracket to the window

side jamb with one screw.

Wood

Vinyl

3 Screws

INSTALL THE AIR CONDITIONER IN

THE WINDOW

Place the air conditioner on the sill with the

bottom mounting rail against its back edge.

Center it and close the window securely behind

the top mounting rail.

It should be level or slightly tilted to the outside.

Use a level; about a 1/3 bubble will be the correct

case slant to the outside.

Extend the left and right accordion panels to

the vertical window sashes and attach 3 screws

through the holes in the upper panels, as

appropriate.

Install the frame locking brackets between the

bottom of the accordion panel and the window

sill. Attach with 2 screws. NOTE: To prevent the

window sill from splitting, drive the pilot holes

before driving the screws.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of General Electric AEM12 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

General Electric AEM12 Manual

Product: