502929

General Electric AEM08 Manual

4
Zoom out
Zoom in
Previous page
1/48
Next page
4
About the controls on the air conditioner—models with touch pads.
Controls
Power Pad
Turns air conditioner on and off. When
turned on, the display will show the room
temperature.
Display
Shows the room temperature or time
remaining on the Delay timer. Shows the
Set
temperature while setting the temperature in
Cool
or
Energy Saver
modes. The
Set
light will
turn on while setting.
NOTE:
The display will change to show the
room temperature after settings have been
made. To recall the
Set
temperature, press the
Temp Increase
▲ or
Decrease
▼ pads.
Temp Increase
▲
/Decrease
▼
Pads
Use to set temperature when in
Cool
or
Energy
Saver
mode. The
Set
light will turn on while
setting.
Delay Timer Increase
▲
(+) /Decrease
▼
(–)
Pads
Each touch of the
Increase
▲
/ Decrease
▼
pads on the unit or the
Increase
+
/ Decrease
–
pads on the remote control will set the delay
time when using the
Delay 1–24hr
timer ( ).
The
Set
light will turn on while setting.
Fan Speed Pads
Use to set the fan speed to
Low, Med, High
or
Auto
on the unit
. NOTE:
On the remote
control, use the fan speed
Increase
+
/
Decrease
–
pads to set the fan speeds to
Low
,
Med
or
High
. Use the
Auto
pad to turn
Auto
fan on.
Mode Pad
Use to set the air conditioner to
Cool
,
Energy
Saver
or
Fan Only
mode.
Delay Pads
Delay ON—
When the air conditioner is off, it
can be set to automatically come on in 1 to 24
hours at its previous mode and fan settings.
Delay OFF—
When the air conditioner is on,
it can be set to automatically turn off in 1 to
24 hours.
How to set:
Press the
Delay 1–24hr
pad on the unit or
the pad on the remote control. Each touch
of the
Increase
▲
/ Decrease
▼ pads on the
unit or the
Increase
+
/ Decrease
–
pads on
the remote control will set the timer in
1-hour intervals. The
Set
light will turn on
while setting.
To review the remaining time on the
Delay
1–24hr
timer, press the
Delay 1–24hr
pad on the
unit or the pad on the remote control. Use
the
Increase
▲
/ Decrease
▼ pads on the unit
or the
Increase
+
/ Decrease
–
pads on the
remote control to set a new time if desired.
To cancel the timer,
press the
Delay 1–24hr
pad
until the light on the
Delay 1–24hr
pad goes off.
Features and appearance will vary.
Lights next to the touch pads on the air conditioner control panel indicate the selected settings.
M
o
d
e
A
u
t
o
Power
Temp
F
a
n
-
F
a
n
+
Delay
Delay 1–24hr
Delay timer
Decrease
Mode select
Fan speed
Decrease
Temperature
set Increase
and Decrease
Remote Control
Delay timer Increase
Auto Fan on/off
Fan speed Increase
Unit power on/off
The display always shows the room
temperature except when setting the
Set temperature or the Delay timer.
Air Conditioner Controls
Light indicates the
delay timer is set.
Light indicates the unit
is in the temperature or
delay time Set mode.
Safety Instructions
Operating
Instructions
Care and Cleaning
Installation
Instructions
Troubleshooting
Tips
Consumer Support
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for General Electric AEM08 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of General Electric AEM08 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info