502970

General Electric 620 Manual

14
Zoom out
Zoom in
Previous page
1/24
Next page
14
1. General
Congratulation! You have bought a high quality refrigerator / freezer. All models are
under permanent quality control and naturally made in Germany. Please read the
following directions for use carefully. This will allow for a trouble free and long
lasting operation. For details of our various models regarding dimensions, gross
capacity, accessories etc. please see our price list resp. catalogues.
2. Installation and putting into operation
2.1 Installation
If possible, unwrap on spot only, remove plastic film, check completeness of
accessories and damage free delivery. Notify supplier immediately in case of any
objections.
Install refrigerator / freezer at a well ventilated, even spot. Avoid places next to heat
sources or direct sunlight. Make sure that there is a good air circulation on top of
the refrigerator / freezer. The distance between top of device and ceiling must be
at least 20 cm. Floor unevennesses may be compensated by the height
adjustable legs (100 - 150 mm).
Important: To guarantee perfect function it is essential to set up refrigerator /
freezer by means of a water level.
2.2 Putting into operation
Refrigerator / freezer should be cleaned before putting into operation - please see
chapter „cleaning and maintenance“.
Put in accessories like tray slides, wire shelves etc. acc. to required height.
Please make sure before connection that electrical current and voltage are in
accordance with the specifications on the nameplate. You will find the nameplate
on the right hand side behind the machine compartment cover (see picture 3,
page 17).
Putting into operation / connection of refrigerators with built-in cooling system.
Electrical connection has to be done over a correctly installed sealed contact
socket. We recommend connection to a separate circuit (fuse 10 A).
Putting into operation / connection of refrigerators for connection to a central
cooling system.
Electrical connection has to be done over a correctly installed sealed contact
socket. We recommend connection to a separate circuit (fuse 10 A).
All other connections like condensate drain, refrigeration lines and control leads
(on given solenoid valve) have to be done by local refrigeration/electric specialist.
Technical and optical design modifications are subject to change without notice
bedanlkuehlschrank_0504.p65 27.08.2004, 10:4814
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for General Electric 620 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of General Electric 620 in the language / languages: English, German as an attachment in your email.

The manual is 5,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info